Hi All,
I brought home my 'new to me' 1983 GL1100 last weekend and the tinkering has begun. I picked it up for $1800 so I wasn't in the DogHouse for too long. It has 20k miles on it and it looks to be in pretty good condition.
The guy I bought it from said he replaced the water pump, starter, calipers, tires, paint,and timing belt about four years ago and only put a couple hundred miles on the bike since. It has spent most of its life sitting the garage so I'm sure things are going to come up.
I took it out for a morning ride and a new sound started coming out of the Tach. I'm hoping this isn't a symptom for something bigger. The performance of the bike wasn't effected so I thought I would thought I would ask for your feedback before I crack anything open. I made a quick video so everyone could hear it.
https://youtu.be/uKkp-CQDE88
1983 GL1100 Begining the Journey
Moderators: Brant, Sagebrush, Forum Moderators
- Robbiga
- Lead Member
- Posts: 5
- Joined: Sat Sep 07, 2019 5:18 pm
- Location: Virginia
- Track T 2411
- Honored Life Member
- Posts: 8482
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: 1983 GL1100 Begining the Journey
It's either the tach itself, or the drive cable. You can lube the cable first, and see if it goes away. I typically use chain and cable lube. I don't see the tach needle jumping around, so it might not be the tach itself.
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- robin1731
- Membership Admin
- Posts: 21724
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: 1983 GL1100 Begining the Journey
Four years of mostly sitting. Change the belts. Much cheaper than new valves.
.
.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- Robbiga
- Lead Member
- Posts: 5
- Joined: Sat Sep 07, 2019 5:18 pm
- Location: Virginia
Re: 1983 GL1100 Begining the Journey
Hi All,
I hear yah, new belts are at the top of the list. I took apart my tach and gave it a PB Blast. It seems like it did the trick.
I made a quick video so everyone could hear the results. This was my first time taking apart a tach, so I guess you could say I was Wing'n it... LOL
https://youtu.be/vOG17TQsigc
I hear yah, new belts are at the top of the list. I took apart my tach and gave it a PB Blast. It seems like it did the trick.
I made a quick video so everyone could hear the results. This was my first time taking apart a tach, so I guess you could say I was Wing'n it... LOL
https://youtu.be/vOG17TQsigc
- maineman
- Brass Member
- Posts: 21
- Joined: Sat Sep 28, 2019 6:34 pm
Re: 1983 GL1100 Begining the Journey
nice video
Thanks
Thanks
Current stable
1977 Honda Gl1000
2006 Yamaha Roadliner
2006 Kawasaki 900
1978 Yamaha DT125
1977 Honda Gl1000
2006 Yamaha Roadliner
2006 Kawasaki 900
1978 Yamaha DT125
-
- Similar Topics
- Replies
- Views
- Last post
-
- 15 Replies
- 2070 Views
-
Last post by Sagebrush
-
- 17 Replies
- 1514 Views
-
Last post by wingrider
-
- 4 Replies
- 319 Views
-
Last post by NotSoLilCrippseys