Cleaning Petcock Screens in Fuel Tank

Discuss everything about Honda GoldWing. Feel free to ask any question related to GoldWing.

Moderators: CYBORG, Oldewing, robin1731, Forum Moderators

Post Reply
kjmarti2
Titanium Member
Titanium Member
Posts: 335
Joined: Tue Nov 12, 2019 2:14 pm
Location: Dallas, GA

Cleaning Petcock Screens in Fuel Tank

#1

Post by kjmarti2 »

Hey Guys,

Got the fuel tank out of my '76 GL1000 over the long holiday weekend because it was absolutely FULL of rust. Took it to a radiator shop yesterday to have them de-rust and seal after which I plan to repaint it. Another look at the pictures I took inside the rusty tank shows the reserve petcock screen is pretty cruddy (I imagine the main is as well but I didn't get eyes on it). Is there anything special I need to do to clean the screens and whatever flowpath exists to the petcock, or will it be taken care of by the de-rusting process? I want to make sure once the tank gets reinstalled that the fuel has a clean unobstructed path to the carbs.

Thanks!
-Kyle
Yellow 1976 GL1000 - "The Phoenix"
1976 GL1000 LTD
2002 CB900F 919
User avatar
Fred Camper
Vice President
Vice President
Posts: 6889
Joined: Wed Aug 12, 2009 9:38 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
Location: Metro Detroit
Contact:

Re: Cleaning Petcock Screens in Fuel Tank

#2

Post by Fred Camper »

My 1976 has the reserve plugged so watching the thread with interest.
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'

You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: Cleaning Petcock Screens in Fuel Tank

#3

Post by rcmatt007 »

de-rusting should clean the screen.... now it is gunk in the tube that is hard to clean out
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
tomk1960
Gold Member
Gold Member
Posts: 1001
Joined: Wed Aug 17, 2011 8:54 am
Location: Worcester, MA

Re: Cleaning Petcock Screens in Fuel Tank

#4

Post by tomk1960 »

My reserve screen (or the tube itself) appears to be plugged. The tank wasn't that rusty, but there was a small rust hole under the reserve screen area that I had welded and repaired. Perhaps the welding process plugged it up? I wonder if there is any type of flexible drill bit that could be snaked down to clear it out? That's preferable to the alternative, which is swapping out the tank for another one. :(
1986 VFR750F Interceptor
1983 Honda CB1100F Super Sport - Red 1123 Resto-Mod
1978 Honda GL1000
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: Cleaning Petcock Screens in Fuel Tank

#5

Post by rcmatt007 »

I tried a speedometer cable... others claimed it worked... I think I finally used a syringe to put acid down the whole and a semi- rigged wire
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
kjmarti2
Titanium Member
Titanium Member
Posts: 335
Joined: Tue Nov 12, 2019 2:14 pm
Location: Dallas, GA

Re: Cleaning Petcock Screens in Fuel Tank

#6

Post by kjmarti2 »

I'm guessing the only access to those tubes is through the 2 holes at the petcock flange, and I don't think I was able to see the primary screen from either the gas cap hole or the sending unit hole. That makes me a bit nervous about sticking something through there, just gotta be careful I guess. I'm a little apprehensive about acid as well because I'm not sure if it'll eat away at the seal that the radiator shop will have put in to stop future rust from building up.

Anybody been successful getting tons of gunk out through the petcock holes? No idea what I'm dealing with in mine but I'm expecting the worst.
Yellow 1976 GL1000 - "The Phoenix"
1976 GL1000 LTD
2002 CB900F 919
pjlogue
Billet Alum. Member
Billet Alum. Member
Posts: 278
Joined: Thu Jun 07, 2018 8:30 am

Re: Cleaning Petcock Screens in Fuel Tank

#7

Post by pjlogue »

If you got an old spedo cable and cut ~2-2.5" off the end and used a variable speed drill you could auger the tubes out carefully. I would alternate using the cable and then flush any gunk out with a thin tube you could stick down the hole and flush with carb cleaner. I would also make sure the end of the cable does not have a sharp edge so you don't chew a hole through the fuel tubes.

-P.
User avatar
pidjones
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3237
Joined: Wed May 22, 2013 4:06 pm
Location: East TN

Re: Cleaning Petcock Screens in Fuel Tank

#8

Post by pidjones »

For viewing, buy a cheap ebay USB endoscope camera and tape it to a coat hanger wire.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
User avatar
chewy999
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3214
Joined: Tue Oct 16, 2012 11:21 am
Location: Haddenham, Cambs, UK

Re: Cleaning Petcock Screens in Fuel Tank

#9

Post by chewy999 »

When I cleaned my tubes out, with the reserve blocked, I used a length of cable in a drill set to anticlockwise to prevent the cable unravelling. Then on a slow speed I worked the cable into the tube, gently pushing the cable in and out to get through the blockage. Once I broke through, I set the drill to clockwise and repeated the process. This causes the strands on the cable to separate, so the strands then clean the inner surface of the tube. When I was happy, I then flushed the tubes with white vinegar, which is what I used to clean the inside of the tank. Worked for me!

anim-cheers1 anim-cheers1 anim-cheers1
Previous Rides,
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
Shadowjack
Silver Member
Silver Member
Posts: 654
Joined: Fri May 26, 2017 11:07 am

Re: Cleaning Petcock Screens in Fuel Tank

#10

Post by Shadowjack »

I used a piece of old speedo cable in a drill like Chewy999 as well. Works fine. The screens were so rusty they just broke out, though.
User avatar
gltriker
Honored Life Member
Honored Life Member
Posts: 5053
Joined: Fri Sep 24, 2010 9:11 pm
Location: central NY State

Re: Cleaning Petcock Screens in Fuel Tank

#11

Post by gltriker »

Filtering screens?

See my post, #62.

It shows the Inside of trike's newly cleaned and coated fuel tank through the filler neck, and the fuel level sender unit opening, too.
https://www.ngwclub.com/forum/viewtopic ... 6&start=60


Scroll down this page to Similar Topics, too.tumb2
Cliff (74yrs ;) )

Keep your eyes and ears open and you'll learn something new, everyday. tumb2

New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^ :oldies

RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi tumb2
"Can't see the paint when your looking thru the handlebars..........." -Oldewing ;)
"I'd rather Ride than Shine" -RAT tumb2 Me Too!!

Cliff

'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM :shock: https://nakedgoldwingsclub.com/forum/page/Welcome

previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
kjmarti2
Titanium Member
Titanium Member
Posts: 335
Joined: Tue Nov 12, 2019 2:14 pm
Location: Dallas, GA

Re: Cleaning Petcock Screens in Fuel Tank

#12

Post by kjmarti2 »

Wow Cliff, your tank is very alien-esque. Mine is covered in a thick white pasty seal. Talked to the radiator guys when I picked it up today and they used compressed air as well to minimize the amount of seal that dried on the screens. Seems like they used a combination of heat, acid down the tubes before applying the seal, and compressed air. Will post before/after pics later this evening.

-Kyle
Yellow 1976 GL1000 - "The Phoenix"
1976 GL1000 LTD
2002 CB900F 919
User avatar
gltriker
Honored Life Member
Honored Life Member
Posts: 5053
Joined: Fri Sep 24, 2010 9:11 pm
Location: central NY State

Re: Cleaning Petcock Screens in Fuel Tank

#13

Post by gltriker »

kjmarti2 wrote:Wow Cliff, your tank is very alien-esque. Mine is covered in a thick white pasty seal. Talked to the radiator guys when I picked it up today and they used compressed air as well to minimize the amount of seal that dried on the screens. Seems like they used a combination of heat, acid down the tubes before applying the seal, and compressed air. Will post before/after pics later this evening.

-Kyle
Is the >thick white pasty seal< called Kreeme?
Cliff (74yrs ;) )

Keep your eyes and ears open and you'll learn something new, everyday. tumb2

New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^ :oldies

RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi tumb2
"Can't see the paint when your looking thru the handlebars..........." -Oldewing ;)
"I'd rather Ride than Shine" -RAT tumb2 Me Too!!

Cliff

'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM :shock: https://nakedgoldwingsclub.com/forum/page/Welcome

previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: Cleaning Petcock Screens in Fuel Tank

#14

Post by rcmatt007 »

sure sounds like kreeme…. wonder if the did not get it cleaned out of the screens. Good luck getting kreeme out
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
pidjones
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3237
Joined: Wed May 22, 2013 4:06 pm
Location: East TN

Re: Cleaning Petcock Screens in Fuel Tank

#15

Post by pidjones »

Kreeme comes out easy. It is soluble in acetone - even when cured! I removed it from the screens on one of mine by inverting the tank in a clamp and positoning a medicine bottle of acetone over the screen with a coat hanger wire guided by watching on my USB endoscope. Duct taped it all in place and two days later the screen was fully cleared. Then I noticed the crappy coating job in the top of the tank and coating already peeling off. Ended up rolling the tank around with two gallons of acetone in it to fully remove the Kreeme.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “GoldWing Tech Discussions”