Todd's "Hoping For a Quickie" refresh...
Moderators: Brant, Sagebrush, Forum Moderators
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Todd's "Hoping For a Quickie" refresh...
Anyway, today he learned how to use a valve spring compressor, as well as properly install the heads and use a torque wrench. The valve covers that came on the engine were junk, warped, with chrome flaking off, etc. so he asked if he could have the spare set of 1000's covers.
The second pic is the mess of o-rings that came with the full upper gasket set. I say 'mess' because not only is there no guide to what's included, four of the o-rings needed to install the transmission cover aren't the right size (everything for the heads seemed to be fine). Oh well, what's another $18.00 (almost half of that is shipping and tax )
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- Liam
- True Blue Steel Biker
- Posts: 2073
- Joined: Sun Jan 06, 2013 11:23 am
- Location: Ireland
Re: Todd's "Hoping For a Quickie" refresh...
Yes those o rings you get in a bag with gasket sets are a pain. You have to try figure out what is what and some are the wrong size. I found same as you with front cover o rings not being right. In the Honda workshop manual for the GL1000 there is a list of every o ring used on the bike and their sizes. Very helpful in trying to figure out what io ring is what.
I admire you being a good dad to Josh.
I admire you being a good dad to Josh.
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Todd's "Hoping For a Quickie" refresh...
This project is frustrating at times! Josh got his tax refund and ordered a slew of parts, but not one brake component. 'Special' engine paint @ $35, but no brake pads? (I won't tell what he spent that money on. Grrrr!)
The engine is all together except for the timing belts and setting the valves. Yesterday Josh mounted his new tires. Interestingly, he said "I just wasted a whole day mounting these stupid tires!"
My response? "That's called 'progress.' You're two tires farther along than you were before..."
HE JUST DOESN'T GET IT!
The engine is all together except for the timing belts and setting the valves. Yesterday Josh mounted his new tires. Interestingly, he said "I just wasted a whole day mounting these stupid tires!"
My response? "That's called 'progress.' You're two tires farther along than you were before..."
HE JUST DOESN'T GET IT!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Todd's "Hoping For a Quickie" refresh...
Josh has been slowly chipping away at bits and pieces of this project. The chrome aftermarket rocker covers that came on the bike were peeling and warped, and he decided he liked the 1000 covers better. He was going to go with all black, but I showed him a few pics with the brushed highlights... I'm actually pretty impressed! The engine is hanging in the driveway, in primer. It'll be matte black as well.
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- Jonesz
- Silver Member
- Posts: 906
- Joined: Mon Apr 24, 2017 9:03 pm
- Location: Manitoba, Canada
Re: Todd's "Hoping For a Quickie" refresh...
Valve and belt covers looking good. The matte black engine block with a few aluminum highlights should really stand out.
Jonesz
1983 GL1100 Aspencade named "Freki" currently undergoing change to a standard. Sold
1999 Valkyrie CT 1500 goes by the moniker "Valerie"
1978 Gl1000 "Loki" new project going to be a Cafe Convertible
1979 Suzuki GS850. Sold
1983 GL1100 Aspencade named "Freki" currently undergoing change to a standard. Sold
1999 Valkyrie CT 1500 goes by the moniker "Valerie"
1978 Gl1000 "Loki" new project going to be a Cafe Convertible
1979 Suzuki GS850. Sold
- Fred Camper
- Vice President
- Posts: 6913
- Joined: Wed Aug 12, 2009 9:38 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
- Location: Metro Detroit
- Contact:
Re: Todd's "Hoping For a Quickie" refresh...
Excellent work
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Todd's "Hoping For a Quickie" refresh...
Josh made some great progress the past few days! Starting to look like a motorcycle again. He's starting to take more time and take pride in his work rather than just having that 'gitrdun' attitude. Which is the whole idea, right?
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- Fred Camper
- Vice President
- Posts: 6913
- Joined: Wed Aug 12, 2009 9:38 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
- Location: Metro Detroit
- Contact:
Re: Todd's "Hoping For a Quickie" refresh...
Try not to cut off his head next time LOL.
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Todd's "Hoping For a Quickie" refresh...
It's been a while since I've updated this thread, mostly because I'm skipping a whole lot of 'drama.' I'll just say Josh got another hard life lesson...
Tonight, I helped him temporarily hook up the remainder of the wiring harness, a remote fuel tank, and give it a go. He thought I was crazy, and that it would never run (self-doubt is one of his biggest problems), but...
IT'S ALIVE!
Tonight, I helped him temporarily hook up the remainder of the wiring harness, a remote fuel tank, and give it a go. He thought I was crazy, and that it would never run (self-doubt is one of his biggest problems), but...
IT'S ALIVE!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- gltriker
- Honored Life Member
- Posts: 5062
- Joined: Fri Sep 24, 2010 9:11 pm
- Location: central NY State
Re: Todd's "Hoping For a Quickie" refresh...
Great news Todd!
Cliff (74yrs )
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
- Fred Camper
- Vice President
- Posts: 6913
- Joined: Wed Aug 12, 2009 9:38 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
- Location: Metro Detroit
- Contact:
Re: Todd's "Hoping For a Quickie" refresh...
Light at the end of the tunnel, and no train this time. Good to know certain progress.
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Todd's "Hoping For a Quickie" refresh...
I helped him adjust the carbs some, only to discover the bike was missing badly, mostly because of poor spark. He trimmed back the wires, which cured that part of it, but still no combustion on #1 cylinder. We have fuel to the bowl, but pilot screw adjustment makes no difference. Next step is a compression test, then most likely pulling the carbs for a look-see.
We also tested the stator so that he can fix up that connection, and did some trouble shooting on the radiator fan. Looks like the motor itself isn't working, so we couldn't tell if the thermal switch is good or not. I might retest the motor before he pulls the radiator to swap it. I'm not too sure about the quality of my connections while jumping it to the battery.
Still, all-in-all, a good amount of progress!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- gltriker
- Honored Life Member
- Posts: 5062
- Joined: Fri Sep 24, 2010 9:11 pm
- Location: central NY State
Re: Todd's "Hoping For a Quickie" refresh...
Very Good!
Cliff (74yrs )
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Todd's "Hoping For a Quickie" refresh...
He commandeered all the 'plastics' from the first Goldwing I ever owned, which had been in storage for years, and started installing them. He also fashioned a primitive straight pipe exhaust (read LOUD) and got that hooked up.
Then he went into a funk... again...
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Todd's "Hoping For a Quickie" refresh...
As I'm sure I mentioned before, Josh didn't want to spend the money on kits to rebuild the brakes. They were the last thing he needed to do to get the bike on the road, and he kept putting it off. Then he 'lost' his garage space. Listening to him P and M for the last two weeks was driving me nuts...
Last Friday, October 2nd, he asked me if he might be able to borrow 'Layla' for some 'bike therapy.' I told him no. Then I told him the 'Slimey Crud Run' was Sunday, and it was going to be great riding weather. I'm such a meanie!
Last Friday, October 2nd, he asked me if he might be able to borrow 'Layla' for some 'bike therapy.' I told him no. Then I told him the 'Slimey Crud Run' was Sunday, and it was going to be great riding weather. I'm such a meanie!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 317 Views
-
Last post by BlueThunder
-
- 5 Replies
- 971 Views
-
Last post by Sidecar Bob
-
- 7 Replies
- 1238 Views
-
Last post by rcmatt007
-
- 95 Replies
- 7321 Views
-
Last post by rcmatt007
-
- 20 Replies
- 856 Views
-
Last post by Sagebrush