1983 GL1100 Standard Bill of sale date 7/5/18
Moderators: Brant, Sagebrush, Forum Moderators
- sparkyrasmus
- Titanium Member
- Posts: 463
- Joined: Sun Jun 08, 2008 7:52 am
- Location: Marshall, MN, USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
Let's see then: GL1100 weight 266 kg, Weight of sidecar, 85kg or 32% of the weight of the bike. Even so, I suspect that I may desire to beef up the frame after checking for rust. That is more my concern - frame weakening due to corrosion over its 40-50 year life.
Goldwings don't accelerate, they gain inertia.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
- Sidecar Bob
- Honored Life Member
- Posts: 7658
- Joined: Sun Jun 11, 2006 10:14 pm
- Location: Kawartha Lakes, Ontario
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
Yeah, I was thinking of that too. Depending on the frame's design (openings &c) and how much road salt it was exposed to....
On the other and, if the pic you posted is your sidecar it looks like it has new hardware and what you can see of the frame in the pic doesn't look bad but that doesn't tell you if there is any rust inside the tubes....
On the other and, if the pic you posted is your sidecar it looks like it has new hardware and what you can see of the frame in the pic doesn't look bad but that doesn't tell you if there is any rust inside the tubes....
Mr. Honda ('83 GL1100/Dnepr) summer How a motorcycle evolves thread
The Famous Eccles ('84 CX650EI/VeloUral) winter Never Ending Build (CX500forum)
Click: Colour schematics for all GL1000 & GL1100 and GL1200 standard models plus instructions on how to download the full size version
"A guy with two sidecars can't be all bad." - Cookie
Another guy with two sidecars..... Hmmmm... must be something to that....
The Famous Eccles ('84 CX650EI/VeloUral) winter Never Ending Build (CX500forum)
Click: Colour schematics for all GL1000 & GL1100 and GL1200 standard models plus instructions on how to download the full size version
"A guy with two sidecars can't be all bad." - Cookie
Another guy with two sidecars..... Hmmmm... must be something to that....
- sparkyrasmus
- Titanium Member
- Posts: 463
- Joined: Sun Jun 08, 2008 7:52 am
- Location: Marshall, MN, USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
So, I found the compression issue. But I just happen to have a rebuilt head
Goldwings don't accelerate, they gain inertia.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
- sparkyrasmus
- Titanium Member
- Posts: 463
- Joined: Sun Jun 08, 2008 7:52 am
- Location: Marshall, MN, USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
Today's project, Rear rotor needs to be replaced, but Ill just run the old pads from the front, which have a lot of wear left, until the new rotor arrives. Then I'll pull the wheel, put on a new sneaker, replace bearings in the swing arm and the wheel and mount the new rotor. Then the new pads can go in and I should be good.
Goldwings don't accelerate, they gain inertia.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
- sparkyrasmus
- Titanium Member
- Posts: 463
- Joined: Sun Jun 08, 2008 7:52 am
- Location: Marshall, MN, USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
This is definitely not good. The cast is broken around the center of the water jacket. I suspect a PO had removed a head and used a pry bar in the center to break off the lower 5mm bolt. The remains of the bolt was still in the tapped hole. It tested good for compression a couple of years ago, but I wonder... Is this a deal breaker?
- Attachments
-
- IMG_20210705_140716071.jpg (245.34 KiB) Viewed 332 times
Goldwings don't accelerate, they gain inertia.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
- Track T 2411
- Honored Life Member
- Posts: 8519
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
I can't tell exactly from your pic, but the sleeves look to be undamaged, which is where most of the seal would be. One thing I might wonder about would be if the damaged area would become a hot spot, but it's right in the water jacket... I would recommend only OEM head gaskets to insure a consistent seal, though. My 2 cents...
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- wingrider
- SUPER BIKER!!!!
- Posts: 3739
- Joined: Thu May 24, 2012 12:15 pm
- Location: Maple Lake, MN USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
I would side with Track on this one…she might get a little more heat in that spot transferring to the coolant, but could be built up if it eases you mind.
2002 1800 Wing
2001 Valkyrie Interstate
1978 1200 EFI Wing with Motorvation Coupe Royale sidecar
1977 1200 Wing cafe/bobber project
1974 Suzuki GT550
2001 Valkyrie Interstate
1978 1200 EFI Wing with Motorvation Coupe Royale sidecar
1977 1200 Wing cafe/bobber project
1974 Suzuki GT550
- sparkyrasmus
- Titanium Member
- Posts: 463
- Joined: Sun Jun 08, 2008 7:52 am
- Location: Marshall, MN, USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
What is the best way to build it up without losing temper on the sleeve?
Goldwings don't accelerate, they gain inertia.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
- wingrider
- SUPER BIKER!!!!
- Posts: 3739
- Joined: Thu May 24, 2012 12:15 pm
- Location: Maple Lake, MN USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
I would be inclined to try something like JB Weld. I have seen some that cures under water, so perhaps that would be better.
2002 1800 Wing
2001 Valkyrie Interstate
1978 1200 EFI Wing with Motorvation Coupe Royale sidecar
1977 1200 Wing cafe/bobber project
1974 Suzuki GT550
2001 Valkyrie Interstate
1978 1200 EFI Wing with Motorvation Coupe Royale sidecar
1977 1200 Wing cafe/bobber project
1974 Suzuki GT550
- sparkyrasmus
- Titanium Member
- Posts: 463
- Joined: Sun Jun 08, 2008 7:52 am
- Location: Marshall, MN, USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
I took your recommendation and used JB Cold Weld. I'll post pics when I get it leveled out an cleaned up.
The rear brake rotor arrived today, new stainless braided lines are due this week, so I'll be able to stop before I can go. Calipers are cleaned, rebuilt and ready. Master cylinders seem to be working fine.
As soon as the cylinder heads are back on and the valve timing reset, the wheels are coming off.
The trailer hitch I ordered from Saber Cycle came without all of the mounting hardware, but with a bit of ingenuity I'll have it ready to go on after the aft end is ready.
Goldwings don't accelerate, they gain inertia.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
- sparkyrasmus
- Titanium Member
- Posts: 463
- Joined: Sun Jun 08, 2008 7:52 am
- Location: Marshall, MN, USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
The left side is ready to torque down with the new head.
I'm loosening all the tappet adjusters to allow the cam to spin free until the belts are in place, then I will adjust the valves.
Goldwings don't accelerate, they gain inertia.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
- Track T 2411
- Honored Life Member
- Posts: 8519
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- sparkyrasmus
- Titanium Member
- Posts: 463
- Joined: Sun Jun 08, 2008 7:52 am
- Location: Marshall, MN, USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
I am stealing polished aluminum and chrome off my other bikes to make the 83 ready for Deadwood. So far the heads are replaced, timing belts done, water pump checked out, new thermostat, rebuilt brake calipers and lots of paint stripping and body panel work. Today, a we are putting up a new tower for my daughter's WIFI (she needs a 30 foot antenna to receive any internet here out on the prairie). Then it's almost time to fire it up and synch carbs.
New sneakers are still on the list and on the top shelf in the garage.
New sneakers are still on the list and on the top shelf in the garage.
Goldwings don't accelerate, they gain inertia.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
- sparkyrasmus
- Titanium Member
- Posts: 463
- Joined: Sun Jun 08, 2008 7:52 am
- Location: Marshall, MN, USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
Just a FYI. If you leave your bike over the summer in a storage shed with the fuel lines detached, check all inlets and outlets for mud dauber wasp nests.
Goldwings don't accelerate, they gain inertia.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
- sparkyrasmus
- Titanium Member
- Posts: 463
- Joined: Sun Jun 08, 2008 7:52 am
- Location: Marshall, MN, USA
Re: 1983 GL1100 Standard Bill of sale date 7/5/18
The new fuel pump arrived today. The old one was not salvageable. I went with the oem pump. Mother Honda knows best.
Goldwings don't accelerate, they gain inertia.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - Winter project/parts bike - custom "Busted"
1983 GL1100 Standard- raised from the dead and back to organ donor status
And the newest acquisition, 1979 XS 650F to be a sidecar tug.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 17 Replies
- 697 Views
-
Last post by Sidecar Bob
-
- 3 Replies
- 913 Views
-
Last post by wmpotter399
-
- 0 Replies
- 274 Views
-
Last post by tedfeast