GL1000 Static Timing Question

Discuss everything about Honda GoldWing. Feel free to ask any question related to GoldWing.

Moderators: CYBORG, Oldewing, robin1731, Forum Moderators

Post Reply
joseph548694
Lead Member
Lead Member
Posts: 6
Joined: Sat Mar 13, 2021 2:24 am

GL1000 Static Timing Question

#1

Post by joseph548694 »

Hi there, a (very) amateur mechanic here. I still have points and this is my first time trying to set the static timing of my 1976 GL1000 and I used the instructions from this forum and the split timing technique on Randakk’s page. I wanted to ask this question about the #1/#2 cylinders before I moved on to the #3/#4 in case I needed to make adjustments.

Left Side (#1/#2 cylinders).
(1st) Test light comes on just before the F1 mark and reads 11.7 volts.
Turns off just after F2 and reads 5.9 volts.

(2nd) Test light comes on just after F1 and reads 6.0 volts.
Turns off about an inch or so after the T2 mark disappears and reads 11.5 volts.

My question is that for the (2nd), should the test light turn off so far after the T2 mark, and if so why is such a different place from when the (1st) turns off?

Also, I am assuming that the difference in voltage is normal but it would great if someone could confirm this.

Thanks again, this forum has always been able to point me in the right direction.
User avatar
Whiskerfish
President
President
Posts: 36852
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Re: GL1000 Static Timing Question

#2

Post by Whiskerfish »

You are probably reading some pass through voltage from the other set of points. Try putting a small piece of cardboard (matchbook cover etc) between the contacts of the set you are not working on and repeat your checks.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!
User avatar
pidjones
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3237
Joined: Wed May 22, 2013 4:06 pm
Location: East TN

Re: GL1000 Static Timing Question

#3

Post by pidjones »

Yes, put a thin insulator (paper, plastic) between the off set of points.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
joseph548694
Lead Member
Lead Member
Posts: 6
Joined: Sat Mar 13, 2021 2:24 am

Re: GL1000 Static Timing Question

#4

Post by joseph548694 »

Thanks for the replies. I put an insulator and got the same result, so I don't think it is pass through voltage. I then tried to set the right side and came out with the following. I'll use the below "picture" to reference where the test light came on/went off.

-T1- (or 2)
-F1- (or 2)
1 (or 2)

The light comes on at the 2 and goes off just before the 1 (so it is early)
The light comes on at -F2- and off just as the -T1- disappears. (comes on at the right time but maybe goes off too late, or is this fine?)

I am thinking maybe my advancer lobe is worn irregularly and needs to be replaced?
User avatar
Lucien Harpress
Honored Life Member
Honored Life Member
Posts: 4077
Joined: Sat Dec 24, 2011 11:41 am
Location: Michigan

Re: GL1000 Static Timing Question

#5

Post by Lucien Harpress »

I'll defer to the experts, but here's my advice as I know it.

If this is your first time setting the timing, the actual voltage you are reading really isn't THAT important. If you set the timing correctly and had issues later? Maybe. But for right now I wouldn't worry about.

Also, how long the light stays on after the "fire" (F) mark isn't really that important either (again, it may later, if you have issues, experts please correct me).

What's really important is that the CHANGE in timing light (on/off) needs to happen right on the F mark. It's putting it very simply, but what happens afterward doesn't really affect anything- the points have opened, your plug has sparked, combustion has happened, the engine rotates away- anything your spark plug is doing after that isn't going to accomplish anything.

Again, there are many many nuances I'm skipping over (including the "split-timing"- personally I kinda understand it, but not fully), but I'd say get the points gap set right, get the timing on the F-marks right, and see how it runs. THEN, if there's problems, you can come back to the rest later. Try not to tackle too many variables at once.
1997 Valkyrie- Light Cutomization, but Too Busy Riding
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete

All advice I give is only valid until an expert corrects me.
joseph548694
Lead Member
Lead Member
Posts: 6
Joined: Sat Mar 13, 2021 2:24 am

Re: GL1000 Static Timing Question

#6

Post by joseph548694 »

I agree that it is probably okay for it to turn off that far past the mark.

My biggest concern is why the one cylinder on the right side fires early when the other fires right on.
User avatar
gltriker
Honored Life Member
Honored Life Member
Posts: 5053
Joined: Fri Sep 24, 2010 9:11 pm
Location: central NY State

Re: GL1000 Static Timing Question

#7

Post by gltriker »

;)
Last edited by gltriker on Mon Aug 30, 2021 3:11 pm, edited 2 times in total.
Cliff (74yrs ;) )

Keep your eyes and ears open and you'll learn something new, everyday. tumb2

New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^ :oldies

RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi tumb2
"Can't see the paint when your looking thru the handlebars..........." -Oldewing ;)
"I'd rather Ride than Shine" -RAT tumb2 Me Too!!

Cliff

'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM :shock: https://nakedgoldwingsclub.com/forum/page/Welcome

previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
User avatar
pidjones
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3237
Joined: Wed May 22, 2013 4:06 pm
Location: East TN

Re: GL1000 Static Timing Question

#8

Post by pidjones »

He might mean the left point set.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
User avatar
gltriker
Honored Life Member
Honored Life Member
Posts: 5053
Joined: Fri Sep 24, 2010 9:11 pm
Location: central NY State

Re: GL1000 Static Timing Question

#9

Post by gltriker »

;)
Last edited by gltriker on Mon Aug 30, 2021 3:10 pm, edited 1 time in total.
Cliff (74yrs ;) )

Keep your eyes and ears open and you'll learn something new, everyday. tumb2

New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^ :oldies

RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi tumb2
"Can't see the paint when your looking thru the handlebars..........." -Oldewing ;)
"I'd rather Ride than Shine" -RAT tumb2 Me Too!!

Cliff

'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM :shock: https://nakedgoldwingsclub.com/forum/page/Welcome

previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
Shadowjack
Silver Member
Silver Member
Posts: 654
Joined: Fri May 26, 2017 11:07 am

Re: GL1000 Static Timing Question

#10

Post by Shadowjack »

I just checked the timing yesterday on my 1000, first time in several years. It was the T2 set that had a split setting. The T1 side was accurate on both. Looked up Randakk's blog, he states that sometimes that happens. He had no explanation.
User avatar
Sidecar Bob
Honored Life Member
Honored Life Member
Posts: 7633
Joined: Sun Jun 11, 2006 10:14 pm
Location: Kawartha Lakes, Ontario

Re: GL1000 Static Timing Question

#11

Post by Sidecar Bob »

I believe it has to do with the way the end of the camshaft moves back & forth in the bearing (if there was no clearance it would be very hard to turn) as the various valve springs push against the lobes.

To clarify about the points and cylinders: The points on the left (attached to the base plate) are for cylinders #1 & #2 (the front cylinders) and the points on the right (attached to the sub plate) are for cylinders #3 & #4 (the rear cylinders).
Mr. Honda ('83 GL1100/Dnepr) summer How a motorcycle evolves thread
The Famous Eccles ('84 CX650EI/VeloUral) winter Never Ending Build (CX500forum)
Click: Colour schematics for all GL1000 & GL1100 and GL1200 standard models plus instructions on how to download the full size version
"A guy with two sidecars can't be all bad." - Cookie
Another guy with two sidecars..... Hmmmm... must be something to that....
User avatar
gltriker
Honored Life Member
Honored Life Member
Posts: 5053
Joined: Fri Sep 24, 2010 9:11 pm
Location: central NY State

Re: GL1000 Static Timing Question

#12

Post by gltriker »

;)
Cliff (74yrs ;) )

Keep your eyes and ears open and you'll learn something new, everyday. tumb2

New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^ :oldies

RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi tumb2
"Can't see the paint when your looking thru the handlebars..........." -Oldewing ;)
"I'd rather Ride than Shine" -RAT tumb2 Me Too!!

Cliff

'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM :shock: https://nakedgoldwingsclub.com/forum/page/Welcome

previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
Bloodhound
Zinc Member
Zinc Member
Posts: 42
Joined: Thu Mar 04, 2021 4:31 pm
Location: New Zealand

Re: GL1000 Static Timing Question

#13

Post by Bloodhound »

When I did the points on my 76 gl1000 , I did manage to get both sides perfect , the problem is in the points and the backing plate , I mucked around with a baby round file and increased the range so that I did not have to split the difference . It takes a while to get your head around it , just advancing one and retarding the other , takes a little time . Cheers .
76 GL1000 ,73 Norton mk5 , 75 Triumph T160 , 49 Matchless G80 500 rigid ,and
X4 76 HondaTL250s
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “GoldWing Tech Discussions”