gl1000 - alternator rpm ?
Moderators: CYBORG, Oldewing, robin1731, Forum Moderators
- dontwantapickle
- Silver Member
- Posts: 947
- Joined: Fri Oct 13, 2017 9:26 pm
- Location: Colorado
gl1000 - alternator rpm ?
Does anybody know if the alternator rotor spins at a 1:1 ratio with the crank?
I don't even know where to begin to look that up.
I don't even know where to begin to look that up.
- pidjones
- SUPER BIKER!!!!
- Posts: 3237
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
Re: gl1000 - alternator rpm ?
Shouldn't be all that hard to put a wrench on the alternator bolt and watch the point cam (1/2 turn/rev) or pull a plug and put a straw in the hole.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: gl1000 - alternator rpm ?
Curious ...... Why do you want to know?
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- dontwantapickle
- Silver Member
- Posts: 947
- Joined: Fri Oct 13, 2017 9:26 pm
- Location: Colorado
- dontwantapickle
- Silver Member
- Posts: 947
- Joined: Fri Oct 13, 2017 9:26 pm
- Location: Colorado
Re: gl1000 - alternator rpm ?
Old Thread...
As I start putting another 1979 GL1000 engine back together,
This time I remembered to check the speed ratio between the crankshaft and the alternator and answered my own question.
Just for reference and posterity, here are my findings.
41/36 gears equals a driven ratio of 1.1389:1
7500 crankshaft rpm = 8542 alternator rotor rpm.
SO... if anyone is ever curious, The alternator DOES spin faster than the engine.
As I start putting another 1979 GL1000 engine back together,
This time I remembered to check the speed ratio between the crankshaft and the alternator and answered my own question.
Just for reference and posterity, here are my findings.
41/36 gears equals a driven ratio of 1.1389:1
7500 crankshaft rpm = 8542 alternator rotor rpm.
SO... if anyone is ever curious, The alternator DOES spin faster than the engine.
- Whiskerfish
- President
- Posts: 36853
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: gl1000 - alternator rpm ?
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
-
- Gold Member
- Posts: 1116
- Joined: Tue Jun 02, 2020 8:39 am
- Location: NW Indiana,
Re: gl1000 - alternator rpm ?
Thanks Don ! I know on a car/truck under-driving the accessories can generally give you a free 10-20hp but It probably can’t be done on the GL.
Red 1976 oe owner
1976 LTD restored
1980 CBX , in the que, to fix the ignorant heavy handed owner
1981 CBX
1977 CB750 K7
2014 FJR OE owner, sold
1980 GL1100
1984 GL1200 naked
1969 CL350, in the que
1976 LTD restored
1980 CBX , in the que, to fix the ignorant heavy handed owner
1981 CBX
1977 CB750 K7
2014 FJR OE owner, sold
1980 GL1100
1984 GL1200 naked
1969 CL350, in the que
-
- Silver Member
- Posts: 654
- Joined: Fri May 26, 2017 11:07 am
Re: gl1000 - alternator rpm ?
It rotates backwards as well so it offsets the torque effect.
- dontwantapickle
- Silver Member
- Posts: 947
- Joined: Fri Oct 13, 2017 9:26 pm
- Location: Colorado
Re: gl1000 - alternator rpm ?
^ I know that it sounds logical, but I have never found evidence to support this idea.
All of the flat 4 engines that I have ever dealt with have no counter balancers (Wing, VW, Subaru, Porsche, Lycoming).
The opposed cylinders cancel each other out, self balancing.
I assume that the GoldWing alternators spin counter to the crank because that was the best way to build the engines.
I should be able to test this theory soon as I'm going to be building another racing engine after I finish this one.
The plan is to remove the whole charging system, electric start, etc. to take strain off of the crank and free up some HP.
I'll be able to tell if there actually is a torque effect as soon as I fire it up.
All of the flat 4 engines that I have ever dealt with have no counter balancers (Wing, VW, Subaru, Porsche, Lycoming).
The opposed cylinders cancel each other out, self balancing.
I assume that the GoldWing alternators spin counter to the crank because that was the best way to build the engines.
I should be able to test this theory soon as I'm going to be building another racing engine after I finish this one.
The plan is to remove the whole charging system, electric start, etc. to take strain off of the crank and free up some HP.
I'll be able to tell if there actually is a torque effect as soon as I fire it up.
-
- Gold Member
- Posts: 1116
- Joined: Tue Jun 02, 2020 8:39 am
- Location: NW Indiana,
Re: gl1000 - alternator rpm ?
Don, I think the “torque” effect is real, maybe. I had a friend years ago that was big into BMW’s and when he’d get into it the torque effect would have it cranked over very noticeably but,,,, that was a twin not a four.
Although he & his brother were putting VW engines into BMW chassis years before there were Goldwings, one with a 2400cc fi VW engine they built was a real monster and would definitely torque over. Does it cause problems ? Not that I ever seen once you got used to it.
They (GL’s) do Jack up & down a lot due to the pinion trying to climb the ring gear…. Is it a problem ? Not that I’ve noticed ,,,, but I’ve found that trying to do the racer boy thing in the corners means you go in slow and add throttle in the corner to give the most clearance, never want to chop the throttle mid corner to prevent bottoming…..
But that’s all different from what you’re trying to do. If I can maybe answer any questions for you just ask ! Top end racing is something that I’ve always wanted to do but time has marched past for me.
Although he & his brother were putting VW engines into BMW chassis years before there were Goldwings, one with a 2400cc fi VW engine they built was a real monster and would definitely torque over. Does it cause problems ? Not that I ever seen once you got used to it.
They (GL’s) do Jack up & down a lot due to the pinion trying to climb the ring gear…. Is it a problem ? Not that I’ve noticed ,,,, but I’ve found that trying to do the racer boy thing in the corners means you go in slow and add throttle in the corner to give the most clearance, never want to chop the throttle mid corner to prevent bottoming…..
But that’s all different from what you’re trying to do. If I can maybe answer any questions for you just ask ! Top end racing is something that I’ve always wanted to do but time has marched past for me.
Red 1976 oe owner
1976 LTD restored
1980 CBX , in the que, to fix the ignorant heavy handed owner
1981 CBX
1977 CB750 K7
2014 FJR OE owner, sold
1980 GL1100
1984 GL1200 naked
1969 CL350, in the que
1976 LTD restored
1980 CBX , in the que, to fix the ignorant heavy handed owner
1981 CBX
1977 CB750 K7
2014 FJR OE owner, sold
1980 GL1100
1984 GL1200 naked
1969 CL350, in the que
- dontwantapickle
- Silver Member
- Posts: 947
- Joined: Fri Oct 13, 2017 9:26 pm
- Location: Colorado
Re: gl1000 - alternator rpm ?
I think the effects of the alternator counter rotating on a GL1000 engine would be minimal at best.
that's why I think it would be interesting to try it both with and without.
that's why I think it would be interesting to try it both with and without.
- Sidecar Bob
- Honored Life Member
- Posts: 7634
- Joined: Sun Jun 11, 2006 10:14 pm
- Location: Kawartha Lakes, Ontario
Re: gl1000 - alternator rpm ?
Sit on the bike with your feet on the ground, holding the handlebars loosely, engine idling and transmission in neutral and rev the engine suddenly and you will feel the torque reaction trying to rock the bike sideways.
As I understand things the effect would be greater if the alternator's flywheel mass was rotating in the same direction as the engine.
Note that CX/GL500/650 bikes have about the same amount of torque reaction as a GL1000/1100 from a much smaller engine but they have the alternator rotor/flywheel mounted directly on the crankshaft.
As I understand things the effect would be greater if the alternator's flywheel mass was rotating in the same direction as the engine.
Note that CX/GL500/650 bikes have about the same amount of torque reaction as a GL1000/1100 from a much smaller engine but they have the alternator rotor/flywheel mounted directly on the crankshaft.
Mr. Honda ('83 GL1100/Dnepr) summer How a motorcycle evolves thread
The Famous Eccles ('84 CX650EI/VeloUral) winter Never Ending Build (CX500forum)
Click: Colour schematics for all GL1000 & GL1100 and GL1200 standard models plus instructions on how to download the full size version
"A guy with two sidecars can't be all bad." - Cookie
Another guy with two sidecars..... Hmmmm... must be something to that....
The Famous Eccles ('84 CX650EI/VeloUral) winter Never Ending Build (CX500forum)
Click: Colour schematics for all GL1000 & GL1100 and GL1200 standard models plus instructions on how to download the full size version
"A guy with two sidecars can't be all bad." - Cookie
Another guy with two sidecars..... Hmmmm... must be something to that....
-
- Gold Member
- Posts: 1116
- Joined: Tue Jun 02, 2020 8:39 am
- Location: NW Indiana,
Re: gl1000 - alternator rpm ?
The older BMW’s I got to play with many years ago had significant torque rock when blipping the throttle, most were 600 cc’s . Don’t know about the new boxers.
Red 1976 oe owner
1976 LTD restored
1980 CBX , in the que, to fix the ignorant heavy handed owner
1981 CBX
1977 CB750 K7
2014 FJR OE owner, sold
1980 GL1100
1984 GL1200 naked
1969 CL350, in the que
1976 LTD restored
1980 CBX , in the que, to fix the ignorant heavy handed owner
1981 CBX
1977 CB750 K7
2014 FJR OE owner, sold
1980 GL1100
1984 GL1200 naked
1969 CL350, in the que
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: gl1000 - alternator rpm ?
I agree with the older BMW's. And my Goldwings also have torgue when the throttle is twisted.....but al both cases only really noticable when sitting still. Off set by the rotation of the wheels when in motion. Under excelleration, not noticable.
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- Sagebrush
- Run Executive
- Posts: 6465
- Joined: Wed Aug 15, 2007 10:35 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/album269/
- Location: Raleigh, NC
Re: gl1000 - alternator rpm ?
Torque effect and balancing are two different things. If you really want to feel the torque effect ride down a straight level road with no hands on the handlebars, every Goldwing I've ever owned will stray to the left. Quite noticeable. Any V-twin I've tried that on will carry on straight because the torque is in line with the front-rear axis. Bobs technique might be a safer method of testing the torque effect though.
Dean Spalding
Raleigh, NC
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." - Albert Einstein
'82 Yellow GL1100
'81 Blue GL1100
My Gallery
My 1100 Build Thread
Raleigh, NC
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." - Albert Einstein
'82 Yellow GL1100
'81 Blue GL1100
My Gallery
My 1100 Build Thread
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8 Replies
- 311 Views
-
Last post by Whiskerfish
-
- 10 Replies
- 437 Views
-
Last post by 441Victor
-
- 22 Replies
- 550 Views
-
Last post by salukispeed
-
- 15 Replies
- 570 Views
-
Last post by Toehead
-
- 4 Replies
- 641 Views
-
Last post by CYBORG