Discuss everything about Honda GoldWing. Feel free to ask any question related to GoldWing.
Moderators: CYBORG, robin1731, Oldewing, Forum Moderators
- Honored Life Member
- Posts: 4046
- Joined: Fri Sep 24, 2010 9:11 pm
- Location: Baldwinsville, NY (central NY)
pidjones wrote: ↑Wed Sep 22, 2021 7:33 am
It would be difficult if not impossible to start without a battery. You would at a minimum need to temporarily jumper the ballast resistor - tough to do if you haven't set up for that previously. And riding without the battery will be hard on the electrical system. Might just be a dead battery - they do die, you know. Then there is the "three yellow wires" connector that is marginally designed (although they did last 30-40 years), are not listed in the manual for service, and live in an area of moisture and battery acid fumes. If the problem is just the battery, NOW would be a good time to replace the connector. Many threads on doing this. I use high current RC helicopter connectors covered by shrink wrap
. Some just solder the wires together (no polarity issues as it is AC) and shrink wrap.
something to be learned. I performed a Google search for ' high current RC helicopter connectors
' and found this example on Amazon. If similar to the connectors you utilize, how are the wire leads secured into these terminals? Thanks
https://www.amazon.com/Female-Bullet-Co ... 71&sr=8-52
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine"
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
- True Blue Steel Biker
- Posts: 2537
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
I solder them (some old, pretty high temp solder). The solder sockets are pretty deep. They don't seem to even get warm.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1972 Triumph T150V Trident rescue - in sad shape
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
- Honored Life Member
- Posts: 6534
- Joined: Sun Jun 11, 2006 10:14 pm
- Location: Kawartha Lakes, Ontario
Mine still has the original connectors and it is fine. There is nothing wrong with the original type of connector if it is properly maintained and all that takes is unplugging and re-plugging it every few years to disturb the oxidation.