Looking at another project 86 Aspy (bought)

[Fred Camper]

Fork seals if required will be easier this time. Not easy, but a bit less of a PITA. Well worth the effort is the film does not work.

[ritalz]

20250508_161238.jpg

Small update today. Added a led volt meter. Ebay special was only a couple dollars.

[Fred Camper]

Always nice to know the voltage. I have an LED on bad dog that flashes different colors to show 5 voltage range. Clearwater Sentry I think.

[Rat]

I have a set of 1200 bag locks with keys if they are of any use.
Just shipping
Gord

[ritalz]

Thanks but I'm pretty well set for locks on both of my 1200's. Even have another set in my parts box.

[Rat]

OK, open offer … I’ll list them in the 'free' forum

Gord

[ritalz]

Another step closer to finish on this one. Sailed through the state inspection. Was having a small issue with the front brake light switch. Easily replaced but noticed a small leak at the sight glass while changing the switch. Sight glass disintegrated and dumped most of the brake fluid. Cut out a new plastic piece and epoxied it in and so far there is no leak. Taxes and license plates for two bikes will have to wait for payday.

[Fred Camper]

Glad you were able to fix the sight glass. Many of us would have swapped out the master. Good for you Al.

[ritalz]

Well, my sight glass fix was not nearly as effective as I had hoped. It decided to still leak a little bit. I epoxied over the entire thing and that stopped the leak. We don't need no stinking sight glass.

[Rat]

A dime is about the right size …

Gord