NGWClub®, Inc.

Yul got it.

OfcZ wrote:Does anyone know if any other years would fit an 83 GL I 1100 for the lower fairing cowls?

You should ask this in the Tech Discussions forum, lots more traffic there.

Roady wrote:Thermostat, GL1000 and GL1100

• Stant #13868
  Napa #101 ($7)

Spark Plugs, GL1000, GL1100

• NGK #D8EA ($3)
  GL1200: NGK # DPR8EA-9 (Gap .035")

And a huge list of Aftermarket Parts Numbers
from Chris' Goldwing Website.
There's lots of other good stuff at this web site.

Here's the link above (which does not exist) way back machine link
http://web.archive.org/web/200605301307 ... market.htm

Thanks ... I'll add that info to the list.

My eyes are sore from reading all this. Thanks guys
My first post!

That's a good way to start. There's also lots of good stuff on the ShopTalk page.

Now, how about going to the Intros forum and let us know a bit about you?

Here are a few numbers for t-stat's. Could they be added to the master list?

Thermostats
GL1000 & GL1100
Beck Arnely #BA143-0689
That number crosses to 2 different Murry numbers and those numbers cross to Napa numbers
Murry 3868- to Napa 101
AND
GL1200, GL1500 & Valkyrie
Murry #3958 to Napa #185, HTK #648
The difference is The 101 is 54mm in diameter and the 185 is 52mm.

Radiator Cap
GL1000 GL1100 & GL500 New Napa Number is 703-1442 or Stant 10229
GL1200 Radiator Cap Stant # 10229 - Becareful, some early 1200's take the same cap as the 1100's

Having trouble working out which parts apply to my 1200 uless it is specifically called out. I can look at the bikes owned by each contributor and assume he is talking about his bike?

Is there a compiled list?

Try this. http://www.ngwclub.com/forum/viewtopic.php?f=24&t=7416 It is in the "CROSS OVER PARTS LIST" Forum

Wingingit2 wrote:Try this. http://www.ngwclub.com/forum/viewtopic.php?f=24&t=7416 It is in the "CROSS OVER PARTS LIST" Forum

Uuuuummmm, that is the very thread we are in.

Ya, but the list is at the top. We are are at the bottom.

But I would imagine someone looking for parts that posted in the parts crossover thread would think to look at it from the beginning.

He asked!!! Simple. No big deal.

I got it. Didn't realise that the list at the beginning was being updated. I just assumed it was the start of the information I guess. Also I'm a slow reader. By the time I got to the last page I forgot about the list at the beginning.

Thanks guys.

Yeah, we try to keep it updated for that reason.