NGWClub®, Inc.

I dig homemeade tools, but this was to do the job in situ. Very little disassembly
I heard a hissing from an exhaust valve however while holding the valve out with the compressed air attachemnt. So I may need to take the heads off and do some actual work. I have never done that before so...I may just let it ride

A C clamp? Nooooo! That's way to easy.

Hamminahammina wrote:I dig homemeade tools, but this was to do the job in situ. Very little disassembly
I heard a hissing from an exhaust valve however while holding the valve out with the compressed air attachemnt. So I may need to take the heads off and do some actual work. I have never done that before so...I may just let it ride

check for this

http://www.ngwclub.com/forum/viewtopic.php?f=1&t=44834