NGWClub®, Inc.

cmclemore_2007 wrote:Don't know if the guys at my napa are idiots or not but they can't find the spark plug boots by that number. Any ideas guys?

https://www.napaonline.com/en/p/NGW8072

Could not find this in the forum but if there sorry for the duplication.

1977 GL1000 Thermostat Housing O-Ring is Fel-Pro 35316.

u joints for 1000 drive shaft
neapco u joint 1-0475
Moog #405

5speed wrote: ↑Mon Dec 28, 2020 2:01 pm u joints for 1000 drive shaft
neapco u joint 1-0475
Moog #405

Not sure how the Neapco joint would work.

The Moog might, although it's a snap ring retained joint and there's no grooves in the U/J to take the rings.
The correct joint is a 1944 like this, intended to be staked. https://www.driveshaftparts.co.uk/index ... ct_id=2292

BUT...... not saying this is what you should buy! You have to be careful in what you are buying because many of the joints of this size are intended for auto steering joints and simply not up to transmitting 80bhp! The best is the one that BMW used in their early bikes, which is priced at around £80 / $110. Some ATVs also use joints of this size.

going by Eric's post.
those BMW one's aren't cheap.
viewtopic.php?f=1&t=75765#p788921

The Neapco and Moog are both listed on Amazon.

Black Hills wrote: ↑Fri Sep 06, 2019 5:57 pm Could not find this in the forum but if there sorry for the duplication.

1977 GL1000 Thermostat Housing O-Ring is Fel-Pro 35316.

also works for the 1100 engines as well.

Roady wrote: ↑Thu Aug 09, 2007 10:46 pm Compiled from this thread and other contributions ... This list is actively updated as suggestions are made in this thread.

Head Gasket Job, Part Numbers, our thanks to Alwing17 for these.

• Qty - - - Part # - - - - - Description
  .....
  4 -- 18291-386-306 -- gasket, exhaust
  .....

the part num for the exhaust gasket is 18291-286-306
4 -- 18291-286-306 -- gasket, exhaust