Page 19 of 19
Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"
Posted: Sun May 03, 2020 9:21 pm
by gregforesi
The tail section slides off the rack and the tackle box slides on. Got my Red Wings on there. You can see the nitrous tank on this side. All in all I have to rate it as a real POS. I suppose I knew that going in, but I wasn't expecting the horrible quality on
everything that came with the kit. I picked up a 3d printer and there are over 50 printed pieces on there.
DBike 3.JPG
Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"
Posted: Sun May 03, 2020 9:23 pm
by Rat
At least it’s not pink ....
Gord
Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"
Posted: Sun May 03, 2020 10:07 pm
by gregforesi
Bite me Gord. It was Frosty Berry.
Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"
Posted: Sun May 03, 2020 10:12 pm
by Rat
I stand corrected .... back to our regular programming ....
Gord
Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"
Posted: Mon May 04, 2020 11:05 am
by 5speed
gregforesi wrote:Bite me Gord. It was Frosty Berry.
Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"
Posted: Mon May 04, 2020 11:32 am
by 5speed
Casper wrote:Well........
Casper the OP is indeed still alive but the old ASC project is of course no longer so. However, I still do have all the parts to make it live once again! I know that I am very remote, and given the current C-19 stuff even more so for my US based friends. But it is all for FREE for the first taker. No shipping, but you gotta come by my Calgary shop with a good sized truck/van/trailer and 2 bikes and a bunch of stuff is yours. I would really love to see this project get done.
Sorry for the long-long-long absence folks, but lots of other stuff going on in my life in the last few years, mostly good.
The bikes and parts are not going anywhere, if anyone has an interest, even long term let me know with a PM.
Cheers to all.
If you decide to part them out I would be very interested in the turn down exhaust on your 76.
