Re: Advise on which looks better please...
Posted: Mon Aug 24, 2020 5:39 am
A riders paradise indeed Dean
NGWClub®, Inc.
A Forum dedicated to the early Honda GoldWings
https://ngwclub.com/forum/
Advise on which looks better please...
Page 3 of 4
Re: Advise on which looks better please...
Posted: Mon Aug 24, 2020 5:40 am
Re: Advise on which looks better please...
Posted: Mon Aug 24, 2020 9:48 am
Re: Advise on which looks better please...
Posted: Mon Aug 31, 2020 1:43 pm
Jonathon,
So I think robin1731 means the corners that I've marked in the attached photo. It they are radiused, there's less chance of them developing cracks over a period of time with the vibrations from road use.
cheers
Dean
So I think robin1731 means the corners that I've marked in the attached photo. It they are radiused, there's less chance of them developing cracks over a period of time with the vibrations from road use.
cheers
Dean
Re: Advise on which looks better please...
Posted: Mon Aug 31, 2020 2:16 pm
yes, sorry I missed the question asking for clarification.
.
Re: Advise on which looks better please...
Posted: Mon Aug 31, 2020 6:33 pm
Here in Winnipeg, Canada, they use photo radar to catch speeders or red light violations. I had a similar setup (first photo) and was told to change it. It was a bit skyward, but easily readable from the back from stationary cameras which are 7-8’ in the air, but mobile units cameras are on the front number of cars, so it probably wasn’t able to be captured.
It might be worth the trouble to inquire of legalities. I fixed mine, went to court with the revision photos and they waived the fine.
Re: Advise on which looks better please...
Posted: Mon Aug 31, 2020 9:57 pm
Do those rear shocks work normally when they are angled forward like that ?
Gord
Gord
Re: Advise on which looks better please...
Posted: Tue Sep 01, 2020 6:00 am
Thanks mate that makes perfect sense, I'll have to try and add something for stability as I would need to remake to hole the thing to get radiused on those strips.
Re: Advise on which looks better please...
Posted: Sun Sep 06, 2020 9:32 pm
Re: Advise on which looks better please...
Posted: Sun Sep 06, 2020 9:53 pm
Ideally they would be angled at the same angle as the swing arm. Anything else is a compromise. Anywhere on the arc of the swingarm
would be the best
would be the best
Re: Advise on which looks better please...
Posted: Wed Sep 16, 2020 9:05 pm
Getting there, just need some paint on it..
Those Kellermann Atto indicators are incredible.
Those Kellermann Atto indicators are incredible.
Re: Advise on which looks better please...
Posted: Thu Sep 24, 2020 4:07 am
Thanks for the advise mate you were spot on so I've welded some edges on those sections. It worked out really well as they made a channel to hide the indicator and licence plate light cablesrobin1731 wrote: ↑Sat Aug 22, 2020 8:13 am Looks good. I do have one thing to point out. The area that you cut out. Where the bend is. It would be better to make the inside corners with a radius. Less potential for cracking that way. When doing work like that I drill a hole, maybe 1/4", at each corner and then cut to that.
.
Thanks again mate.
Re: Advise on which looks better please...
Posted: Thu Sep 24, 2020 10:26 am
You do nice work JohnathonC
Re: Advise on which looks better please...
Posted: Thu Sep 24, 2020 10:56 am
Nicely done! 
Re: Advise on which looks better please...
Posted: Thu Sep 24, 2020 8:44 pm