Torques Values
Moderators: Whiskerfish, Forum Moderators
- Whiskerfish
- President
- Posts: 37443
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Torques Values
northwood has been working on several different areas of his bike and got a bit frustrated looking all over the book for torques values so he built this spread sheet. This is straight from the Honda Shop manual.
For those that can not open an xls I also have it here in jpg format
For those that can not open an xls I also have it here in jpg format
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
- Placerville
- Honored Life Member
- Posts: 6494
- Joined: Tue Feb 02, 2010 9:29 pm
Re: Torques Values
Wow! This is going straight into my GoldWing file. Excellent, and thank you northwood and Whisker.
- roncar
- Vice President
- Posts: 4856
- Joined: Sat Jan 05, 2008 4:30 pm
- My Album: http://www.ngwclub.com/gallery3/index.p ... s/roncarGL
- Location: Lakeland, Florida
Re: Torques Values
Don't forget this change.
- Attachments
-
- sb1000.14.jpg (68.76 KiB) Viewed 10723 times
- northwood
- Silver Member
- Posts: 902
- Joined: Fri Oct 08, 2010 2:02 pm
- Location: Mountain View, CA
Re: Torques Values
Thats what I am looking for! Keep em coming and let me know your sources and I will update appropriatly!
2015 Honda Grom (Soon)
2006 Honda VFR800 "Snowflake"
2007 Honda "Chicken Bacon Ranch" (CBR1000RR)
Previous Bikes:
1975 Honda "ol' Bird Dog" GL 1000 (Gone but not forgotten)
1982 Kawasaki AR80 (The one I will regret selling)
1982 Honda CM450E Not so Project "Connie"
1987 Yamaha Virago XV535
2005 Triumph Daytona 650
2006 Honda VFR800 "Snowflake"
2007 Honda "Chicken Bacon Ranch" (CBR1000RR)
Previous Bikes:
1975 Honda "ol' Bird Dog" GL 1000 (Gone but not forgotten)
1982 Kawasaki AR80 (The one I will regret selling)
1982 Honda CM450E Not so Project "Connie"
1987 Yamaha Virago XV535
2005 Triumph Daytona 650
- Roady
- Member Relations &_Graphics
- Posts: 11957
- Joined: Wed Jun 20, 2007 2:35 pm
- Location: Port St. John, FL
Re: Torques Values
That's excellent NW, what a great resource!
(For those that want to use the XLS, just download OpenOffice.org's free, full office suite.)
(For those that want to use the XLS, just download OpenOffice.org's free, full office suite.)
- gadelsperger
- Chrome Member
- Posts: 112
- Joined: Wed Apr 09, 2008 11:55 pm
- Location: Sacramento, CA
Re: Torques Values
George in Rancho Cordova (Sacramento is a suburb) CA
- pidjones
- SUPER BIKER!!!!
- Posts: 3271
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
Re: Torques Values
Somehow missing from the official Honda manual is the LEFT Step mounting nut torque (also partly secures the removable section of the frame). Well, actually listed incorrectly as a 10mm in my manual, although it is in fact 12mm. I would suggest 40-45ftlbs for it.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
- desertrefugee
- SUPER BIKER!!!!
- Posts: 3947
- Joined: Fri Nov 11, 2011 9:33 pm
- Location: Chandler, AZ, USA
Re: Torques Values
<<< I know this is an old thread, but I couldn't resist >>>
There are lots of torque values that are important. Some are not. Common sense and torque appropriate for the hardware used usually works in many applications.
For non-critical fasteners - or those that are securing rather than providing compression loading or clamping force - I like to use the German method:
Gudanteit.
There are lots of torque values that are important. Some are not. Common sense and torque appropriate for the hardware used usually works in many applications.
For non-critical fasteners - or those that are securing rather than providing compression loading or clamping force - I like to use the German method:
Gudanteit.
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
-
- Cast Iron Member
- Posts: 95
- Joined: Mon Nov 26, 2018 9:22 pm
Re: Torques Values
i am still fairly new to this site and just found this page . would love to see one for the gl1100; what a time-saver !
- robin1731
- Membership Admin
- Posts: 21802
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: Torques Values
Torque settings for fasteners will be in a shop manual. You should have one for any bike you own that you want to work on. There are also "standard" torque settings for any size fastener. A pretty good guide that works most of the time.twooldwings wrote:i am still fairly new to this site and just found this page . would love to see one for the gl1100; what a time-saver !
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
-
- Cast Iron Member
- Posts: 95
- Joined: Mon Nov 26, 2018 9:22 pm
Re: Torques Values
all correct ... having it laid out on a quick reference sheet like this really just saves time.robin1731 wrote:Torque settings for fasteners will be in a shop manual. You should have one for any bike you own that you want to work on. There are also "standard" torque settings for any size fastener. A pretty good guide that works most of the time.twooldwings wrote:i am still fairly new to this site and just found this page . would love to see one for the gl1100; what a time-saver !
-
- Honored Life Member
- Posts: 4650
- Joined: Wed Jun 28, 2006 2:52 pm
- Location: up by the Canadian border in WA state
Re: Torques Values
glad this got bumped, hadn't seen or thought about it in a while.
sorta bulldogged custom 1978 GL1000 - "geekster"
full Vetter dress 1979 GL1000 - "Barge" (currently down)
1986 1200 Aspencade - "Heart of Gold" - daily rider
1990 1500 Aspencade - It's ALIVE! but very, very naked. not in a good way.
1978 for $100 - project in worx
1978 from a previous member here - taking up space
my original '79 bought in '91 - replacing engine (eventually, maybe someday)
H2G2=42
A competent and self-confident person is incapable of jealousy in anything. Jealousy is invariably a symptom of neurotic insecurity. ~ Robert A. Heinlein
The good thing about science is that it's true whether or not you believe in it. ~ Neil deGrasse Tyson
full Vetter dress 1979 GL1000 - "Barge" (currently down)
1986 1200 Aspencade - "Heart of Gold" - daily rider
1990 1500 Aspencade - It's ALIVE! but very, very naked. not in a good way.
1978 for $100 - project in worx
1978 from a previous member here - taking up space
my original '79 bought in '91 - replacing engine (eventually, maybe someday)
H2G2=42
A competent and self-confident person is incapable of jealousy in anything. Jealousy is invariably a symptom of neurotic insecurity. ~ Robert A. Heinlein
The good thing about science is that it's true whether or not you believe in it. ~ Neil deGrasse Tyson
- Whiskerfish
- President
- Posts: 37443
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Torques Values
Standard torques are here: https://ngwclub.com/forum/viewtopic.php ... 56#p453196
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 20 Replies
- 966 Views
-
Last post by scootsx2