CROSS OVER PARTS LIST

[Toehead]

Crank seal, GL1000 and GL1100:

Timken P/N 223542
National P/N 223542

Used as a : 1993 infinity J30 rear differential seal

The Timken is easier to install, as it is tapered so it self centers. The national is not tapered. The Timken is cheaper as well.

About 7$ at autozone/advanced auto/etc

[Roady]

Thanks Toehead. It's been added to the list.

[Nohands]

I found this list of stearing head bearing sizes and X-over front end referance.

http://scandalon.com/2009/06/motorcycle ... ize-chart/

[82aspy]

this sticky is to list tried and true cross over parts. like parts from other Hondas and other sources that will cross over to our gl bikes. even if it is a year crossover, you can list it here. I know that Frenchy and Randak probably have a partial list they themselves use. lets build this one....T

does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100

[robin1731]

this sticky is to list tried and true cross over parts. like parts from other Hondas and other sources that will cross over to our gl bikes. even if it is a year crossover, you can list it here. I know that Frenchy and Randak probably have a partial list they themselves use. lets build this one....T

does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100

This is really a list of bolt on cross over parts. Like for car parts that are a direct fit. If it needs modifying to fit it isn't a crossover. It's usable. IMO

[Roady]

I found this list of stearing head bearing sizes and X-over front end referance.

http://scandalon.com/2009/06/motorcycle ... ize-chart/

These are the ones from that list that apply to GL's.

Upper: 26 x 48.5 x 15.2
Lower: 30 x 50 x 14.4
Honda GL1000 (75-76)
Honda GL1000L* (76)

Upper: 25 x 47 x 15
Lower: 30 x 55 x 17
Honda GL1000 (77-79)

Upper: 26 x 47 x 15
Lower: 30 x 55 x 17
Honda GL1100 (80-83), GL1100C/AC/DC/IC*, GL1100D2D/AD/A/IA/DA*, GL1100RB/RC/D/ID/DD*
Honda GL1200 (84-87)
Honda GL1500 (88-91)
Honda GL1500 AP-AR (93-94)

* - Do you know what these suffixes mean?

does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100

This is really a list of bolt on cross over parts. Like for car parts that are a direct fit. If it needs modifying to fit it isn't a crossover. It's usable. IMO

I agree with Robin. But, that one is worth saving so I've moved it to this Parts Reference forum.

[82aspy]

i'm not familiar with the parts reference forum but suggest making it clear the rear m/c mod is untested for the 83 gl1100 linked setup, at least the way i'm reading the thread,

however, prob wouldn't be hard to find a closer matched m/c, as far as piston size goes, with the same mod

if required for the 83 linked brakes

does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100

This is really a list of bolt on cross over parts. Like for car parts that are a direct fit. If it needs modifying to fit it isn't a crossover. It's usable. IMO

I agree with Robin. But, that one is worth saving so I've moved it to this Parts Reference forum.

[Roady]

i'm not familiar with the parts reference forum ...

It's just a "branch" off the Technical forums "tree" .... here. Take a look at the Board Index.

(Note to self: A drawing of the whole tree would be helpful ... someday. )

[SJBikesaws]

Large O ring for oil filter housing on GL1100 GL1000 and GL1200

Napa Balkamp # 727-2340

Dumped the oil for a quicky change on Friday, and the 0 ring on my filter housing was in pretty bad shape. Napa had this one on the shelf and it fit perfectly, so I got to ride,,,YAY!!!!

Yea, I know, buy a new filter, but I didn't have one and had a few miles built up on the oil. The stealership didn't have a filter in stock.

[Roady]

NAPA usually stocks filters.

[CYBORG]

Autozone and advance auto usually have them as well

[robin1731]

And Oreilly's.

[Roady]

Et cetera, et cetera, et cetera.


Oil Filter - GL1000, GL1100 & GL1200

• Honda Part #15410-426-010, 15410-422-004
  AMSOil SMF-101
  FRAM #CH6009 (comes with both o-rings)
  K&N KN401
  Napa #PS4940
  Purolator #ML16809
  STP SMO-09
  WIX #24940

[taylorsel]

We are a bunch of old guys if we got that reference

[OfcZ]

Does anyone know if any other years would fit an 83 GL I 1100 for the lower fairing cowls?