Where is a good place to order a set of starter brushes for my 83 GL1100 ?
I have seen the ones on eBay, but sometimes getting parts off the bay is a crap shoot.
Thanks in advance
Bill
Starter brushes
Moderators: Oldewing, CYBORG, robin1731, Forum Moderators
- wildbill1962
- Cast Iron Member
- Posts: 74
- Joined: Mon Sep 16, 2013 7:05 pm
- Location: victoria tx
Starter brushes
De Oppresso Liber
1983 GL1100
1983 GL1100
- Red2trike
- Titanium Member
- Posts: 346
- Joined: Sun Sep 30, 2012 11:57 am
- Location: PA,USA
- fish
- SUPER BIKER!!!!
- Posts: 3110
- Joined: Wed Feb 18, 2009 1:50 pm
- Location: tucson
Re: Starter brushes
some of the better equipped hardsware stores have an assormment of brushes to repair powertools and such.
I go to the local ACE hardware & dig untill I find something close. It is easy to file them to fit
You can fix a 300$ alternator or starter for 8$
I go to the local ACE hardware & dig untill I find something close. It is easy to file them to fit
You can fix a 300$ alternator or starter for 8$
Timothy Mark Fisher
Catalina Arizona
"ride it.. don't be one of those guys who will fix it 'til it's broken" (JDVorchek)
"It is not logic or economics that drive a motorcyclist but passion!" (bugdaddy66)
"I fully agree with fish, well at least 27% of the time."(Casper)
"Why do you have to ruin a perfectly good thread with common sense"(Placerville)
"my best guess for an answer would be a stream of complex expletives" (Transitman)
"I like a cold beer with my beer" (OldeWing)
"Most of us like the sport of wrenching too." (fred camper)
"Now go ride the heck out of it, til mother says do your chores"(Gowing)
"I agree with Fish" (Salukispeed)
Catalina Arizona
"ride it.. don't be one of those guys who will fix it 'til it's broken" (JDVorchek)
"It is not logic or economics that drive a motorcyclist but passion!" (bugdaddy66)
"I fully agree with fish, well at least 27% of the time."(Casper)
"Why do you have to ruin a perfectly good thread with common sense"(Placerville)
"my best guess for an answer would be a stream of complex expletives" (Transitman)
"I like a cold beer with my beer" (OldeWing)
"Most of us like the sport of wrenching too." (fred camper)
"Now go ride the heck out of it, til mother says do your chores"(Gowing)
"I agree with Fish" (Salukispeed)
- salukispeed
- Platinum Member
- Posts: 1951
- Joined: Sun Feb 21, 2010 10:08 am
- Location: Oak Forest Illinois US
Re: Starter brushes
They are still available from Honda last I checked and they have the proper gauge brush leads/connectors and brush material ( Copper, Carbon, Graphite blend ) to carry the high amps. Around $20 I believe for a pair. A little bit pricy but last a very long time. IMHO
Honda 72 CL100 sold
74 CB750 K4 nice driver
1966 CA77/305 Dream nostalgic driver
84 GL1200I work in progress
1970 CT 70
1982 GL500 Interstate
74 CB750 K4 nice driver
1966 CA77/305 Dream nostalgic driver
84 GL1200I work in progress
1970 CT 70
1982 GL500 Interstate
- Recycled Roadkill
- Honored Life Member
- Posts: 4053
- Joined: Wed Sep 17, 2008 10:21 am
- Location: Garland, TX
- Contact:
Re: Starter brushes
A huge +1 on this tip which is a good fix for any generator, alternator or motor in need of a carbon brush replacement.fish wrote:some of the better equipped hardsware stores have an assormment of brushes to repair powertools and such.
I go to the local ACE hardware & dig untill I find something close. It is easy to file them to fit
You can fix a 300$ alternator or starter for 8$
Bob Gill
Four wheels move the body but two wheels move the soul.
It's never too late to have a happy childhood!
I've considered joining Insomniacs Anonymous, but I decided I'd sleep on it.
'96 Honda GL 1500A Rolling Couch (Not Naked)
'78 Honda GL 1000 Gentle Glide
'77 Honda GL 1000 Black Mamba (Sold)
Four wheels move the body but two wheels move the soul.
It's never too late to have a happy childhood!
I've considered joining Insomniacs Anonymous, but I decided I'd sleep on it.
'96 Honda GL 1500A Rolling Couch (Not Naked)
'78 Honda GL 1000 Gentle Glide
'77 Honda GL 1000 Black Mamba (Sold)

- wildbill1962
- Cast Iron Member
- Posts: 74
- Joined: Mon Sep 16, 2013 7:05 pm
- Location: victoria tx
Re: Starter brushes
Thanks Guys !! I placed an order for a set of brushes. Most of the time, thats all ya need.
Thanks again
Thanks again
De Oppresso Liber
1983 GL1100
1983 GL1100