Looking for pics of OEM GL1100 mufflers cut open
Moderators: Oldewing, CYBORG, robin1731, Forum Moderators
-
manco
- Brass Member
- Posts: 28
- Joined: Wed Jul 27, 2016 1:05 pm
Looking for pics of OEM GL1100 mufflers cut open
I am considering restoring a set of 82 GL1100 exhaust pipes. Long story short the pipes have the typical rust rot near the rear mounts. I am thinking to cut open the cans, remove the rusted sections and replace with new sheet metal. Before I cut into the cans I would like to know what the structure is inside, if there are better and worse spots to cut in at, ect. Has anyone ever cut into a set of cans, got pics or know where to find more info?
1982 GL1100 Aspencade w/ California Sidecar
-
Whiskerfish
- President
- Posts: 37568
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Looking for pics of OEM GL1100 mufflers cut open
I think I saw one once for the 1000 but can not seem to find it right now. Never seen one for the 1100 that I can recall.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
-
- Similar Topics
- Replies
- Views
- Last post