It is a touch firmer than it was. I did not remove any foam from the seating "sweet spot" just mostly from the sides and from the passenger area. If you look at the uncovered seat after cutting you can make out the original surface.
I added about an inch of foam under the driver portion to make it fit my long-ish legs better.
2026 NGW Calendars are ready to order here
https://ngwclub.com/forum/viewtopic.php?t=79383#p834018
https://ngwclub.com/forum/viewtopic.php?t=79383#p834018
Stock Seat becomes Custom, GL1100
Moderators: Whiskerfish, Forum Moderators
-
Roady
- Member Relations &_Graphics
- Posts: 11957
- Joined: Wed Jun 20, 2007 2:35 pm
- Location: Port St. John, FL
-
Roady
- Member Relations &_Graphics
- Posts: 11957
- Joined: Wed Jun 20, 2007 2:35 pm
- Location: Port St. John, FL
Re: Stock Seat becomes Custom, GL1100
Pictures restored in post #1.