Alright guys my bike once had a fairing but now it doesn't and it is in need of a new head light one for a naked so doesn't anyone have any suggestions on what one to use? The previous owner had but a hologene light in the old bucket. I need and new bucket and rings to hold the light in.
But now for the real reason i am here in the tech section lol. I did my first dumb thing while removing the factory bars I could not figure out how to get the wire out of the bar. (not knowing you had to disconnect all the wires and the harness) I dumbly opened the controls and cut the wires and pulled them out of the bottom of the bar. Now my question can this be fixed or did I make a big booboo and now going to have to get new controls? If I have to get new controls does anyone have a good source? just lookin for some factory style 1976.
Walking a thin line can mean so many things but my line is blue.......The Thin Blue Line
Loud pipes save lives
It could be fixed but if it was me I'd get different controls. You could put a post in the wanted section on here. Cyclepsycho may have something, they probably do. Then there is always ebay.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
I just pulled both sides off of my 76. Let me know if your interested? The start button fell out and someone wired it to a diff. button, but the wires are there. everything else is fine.
I’m in a jam , I took off the fairing and going naked, so I bought a head light but can I remove some of the wires or do I need to cram them all into the headlight ? M sure I can try to trace them all down and just use what I need but thought I would ask before I screw something up
jimbo wrote: ↑Fri Nov 10, 2023 9:03 pm
I’m in a jam , I took off the fairing and going naked, so I bought a head light but can I remove some of the wires or do I need to cram them all into the headlight ? M sure I can try to trace them all down and just use what I need but thought I would ask before I screw something up
What bike?
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
They use a sub-harness to attach fairings, and use a box behind the fairing to hold the wires that would be in the headlight bucket. Believe it or not, the factory wiring will fit back into the headlight bucket. Usually it takes me two or more tries to get an arrangement that works well.
You do not have the required permissions to view the files attached to this post.
intrigued by the wail...seduced by the scream.
'78 cb750K, '83 GL1100s,I,&A,'08FXSTC, '79 WilMac trike
so doesn't anyone have any suggestions on what one to use? The previous owner had but a hologene light in the old bucket. I need and new bucket and rings to hold the light in. 
