I'm thoroughly shocked and stunned.
I once told him through this site that he had inspired me to not only get things done on my bike, but he made me realize that I needed to do it with my very best effort. A true inspiration.
I feel saddened for and pray for his family and his friends. I will raise a few beers later tonight in his memory.
Kev in Maine, USA
RIP pedrotq
Moderators: Whiskerfish, Brant, Forum Moderators
- BikeMaine
- Gold Member
- Posts: 1109
- Joined: Sun Feb 07, 2016 7:57 pm
- Location: Maine, U.S.A.
Re: RIP pedrotq
Kevin
1982 GL1100A
1982 GL1100A
- Fred Camper
- Vice President
- Posts: 7367
- Joined: Wed Aug 12, 2009 9:38 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
- Location: Metro Detroit
- Contact:
Re: RIP pedrotq
Going out with a February BOTM is not a bad way to bow out. Hard to time it that well.
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
- HOTT
- Run Executive
- Posts: 3267
- Joined: Sun Aug 02, 2009 6:48 pm
- My Album: http://www.ngwclub.com/gallery3/index.php/wingmans/HOTT
- Location: Spring,TX
- Contact:
Re: RIP pedrotq
Saddened to read this. I’ll be taking some time to re-read his posts. Rest well…
HOTT
HOTT
If we can't fix it, we can fix it so no one else can.
the Condor BOTY 2011
Ol' Sparky BOTM Dec. 2011
Lucky #13 BOTY 2018
the Condor BOTY 2011
Ol' Sparky BOTM Dec. 2011
Lucky #13 BOTY 2018
-
- Cast Iron Member
- Posts: 58
- Joined: Tue Apr 29, 2014 10:39 pm
- Location: Houston, TX
Re: RIP pedrotq
Ah, d*mmit.
Whenever I saw one of his posts, I absolutely knew I was going to learn something. His skill at engineering a solution to a problem was the best, and he would always share with the rest of us.
Thank you, Pedro, for all you have done in the past and for unselfishly sharing it with us.
Rest in peace.
Whenever I saw one of his posts, I absolutely knew I was going to learn something. His skill at engineering a solution to a problem was the best, and he would always share with the rest of us.
Thank you, Pedro, for all you have done in the past and for unselfishly sharing it with us.
Rest in peace.
Steve
82 GL1100
Houston, TX
"Is it a project? Nah, it's therapy..."
82 GL1100
Houston, TX
"Is it a project? Nah, it's therapy..."