Has anyone put a chrome CB750K rear fender on a GL1100? I've done the CB900C front conversion, but never a rear. Anyone?
looks something like this ...
CB750K rear fender on GL1100?
Moderators: sunnbobb, Neil, Forum Moderators
-
toomanybikes
- Titanium Member
- Posts: 300
- Joined: Sun Oct 27, 2019 6:38 am
CB750K rear fender on GL1100?
You do not have the required permissions to view the files attached to this post.
Asheville, NC, USA
Stable as of 06Mar25: '19 Triumph Scrambler XC, '22 Moto Guzzi V85TT, '99 Honda Valkyrie, '81 Honda GL1100, '80 Suzuki GS850G, '78 Honda CB750F SS
Stable as of 06Mar25: '19 Triumph Scrambler XC, '22 Moto Guzzi V85TT, '99 Honda Valkyrie, '81 Honda GL1100, '80 Suzuki GS850G, '78 Honda CB750F SS
-
Whiskerfish
- President
- Posts: 37886
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: CB750K rear fender on GL1100?
I did one from a HD but never a 750. If I remember right so long as it is 7 1/4 wide it should fit up fairly easy
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
-
toomanybikes
- Titanium Member
- Posts: 300
- Joined: Sun Oct 27, 2019 6:38 am
Re: CB750K rear fender on GL1100?
Is the 7 1/4 at the wide flat section with the mounting holes or the back curved section covering the wheel and holding the taillight?Whiskerfish wrote: ↑Fri Dec 20, 2024 8:06 pm I did one from a HD but never a 750. If I remember right so long as it is 7 1/4 wide it should fit up fairly easy
Asheville, NC, USA
Stable as of 06Mar25: '19 Triumph Scrambler XC, '22 Moto Guzzi V85TT, '99 Honda Valkyrie, '81 Honda GL1100, '80 Suzuki GS850G, '78 Honda CB750F SS
Stable as of 06Mar25: '19 Triumph Scrambler XC, '22 Moto Guzzi V85TT, '99 Honda Valkyrie, '81 Honda GL1100, '80 Suzuki GS850G, '78 Honda CB750F SS
-
Whiskerfish
- President
- Posts: 37886
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: CB750K rear fender on GL1100?
Between the frame rails
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
-
toomanybikes
- Titanium Member
- Posts: 300
- Joined: Sun Oct 27, 2019 6:38 am
Re: CB750K rear fender on GL1100?
Speaking of front fenders, does anyone happen to know if a CX500C front fender will work on the GL1100? Both have 19" front wheels, but the width and mounting points might be different. I've done a CB900C fender before with a small adapter plate.
Just looking for options.
Just looking for options.
Asheville, NC, USA
Stable as of 06Mar25: '19 Triumph Scrambler XC, '22 Moto Guzzi V85TT, '99 Honda Valkyrie, '81 Honda GL1100, '80 Suzuki GS850G, '78 Honda CB750F SS
Stable as of 06Mar25: '19 Triumph Scrambler XC, '22 Moto Guzzi V85TT, '99 Honda Valkyrie, '81 Honda GL1100, '80 Suzuki GS850G, '78 Honda CB750F SS
-
flyin900
- Platinum Member
- Posts: 1512
- Joined: Sun Jan 10, 2010 3:50 pm
- Location: Canada
Re: CB750K rear fender on GL1100?
Here's my now sold 1981 GL1100 Standard with the early GL1000 front fender which was a bolt straight on the forks. The clearance was a little tight around the top of the tire, yet I never had any issues with rubbing or rain evacuation from the fender.
The CX500C I can't comment there on the fit of that fender.
The CX500C I can't comment there on the fit of that fender.
You do not have the required permissions to view the files attached to this post.
Current Bikes:
DISPLAY MODELS:
1966 CL77 - Honda 305cc - Dual purpose - "Gentleman's Scrambler" was a period moniker.
1967 CL175K0 - Low production number with #802 engine serial- winter 2019/2020 full restoration.
1972 CB350F - Baby Four with low mileage - Cosmetic refresh to the next level 2021/2022.
RIDERS AND FUN TOYS:
1978 CB550K - Very original bike with only 7499 Km. from new - light cleanup and refresh done.
1983 CB1100F - Canadian model - DOHC Supersport in pristine low kilometre condition from new.
1984 CX650E - Restored summer 2017 - a rare Eurosport model - excellent one owner bike.
DISPLAY MODELS:
1966 CL77 - Honda 305cc - Dual purpose - "Gentleman's Scrambler" was a period moniker.
1967 CL175K0 - Low production number with #802 engine serial- winter 2019/2020 full restoration.
1972 CB350F - Baby Four with low mileage - Cosmetic refresh to the next level 2021/2022.
RIDERS AND FUN TOYS:
1978 CB550K - Very original bike with only 7499 Km. from new - light cleanup and refresh done.
1983 CB1100F - Canadian model - DOHC Supersport in pristine low kilometre condition from new.
1984 CX650E - Restored summer 2017 - a rare Eurosport model - excellent one owner bike.
-
LastMohawk
- Billet Alum. Member
- Posts: 239
- Joined: Fri Jun 07, 2013 7:57 am
- Location: Eifel, Germany
- Contact:
Re: CB750K rear fender on GL1100?
Hello to Canada,
last year I fitted a front fender from a CX500C to my GL1000 (with the later fork). Fits 1:1 to the fork.
here the old condition with GL1000 front fender and here the conversion to the slim CX500C front fender. greetings Harald
last year I fitted a front fender from a CX500C to my GL1000 (with the later fork). Fits 1:1 to the fork.
here the old condition with GL1000 front fender and here the conversion to the slim CX500C front fender. greetings Harald
You do not have the required permissions to view the files attached to this post.