Thought i would post here sence someone might have more experiance or a gl1100 manual. My cb900 has a honda line faring and the short of it is that it's a goldwing faring of the 1980 modle. I've been trying to figure out how to pull it off but i can't come up with anything.
If anyone here has some ideas it would be welcome.
faring headlight question
Moderators: Whiskerfish, ascot, Forum Moderators
-
quakeholio
- Titanium Member
- Posts: 432
- Joined: Sat Jan 15, 2005 1:42 am
-
Try
- NGW Founder
- Posts: 1914
- Joined: Fri Oct 15, 2004 5:33 pm
- My Album: http://www.ngwclub.com/gallery3/index.p ... wing-album
- Location: Norway
- Contact:
Re: faring headlight question
quakeholio wrote:Thought i would post here sence someone might have more experiance or a gl1100 manual. My cb900 has a honda line faring and the short of it is that it's a goldwing faring of the 1980 modle. I've been trying to figure out how to pull it off but i can't come up with anything.
If anyone here has some ideas it would be welcome.
I really don't know, this pictures may help...
--
Try
"84 - GL1200 Standard
-
Try
"84 - GL1200 Standard
-
crowbar and hammer come to mind quakeholio 
-
quakeholio
- Titanium Member
- Posts: 432
- Joined: Sat Jan 15, 2005 1:42 am
-
Wing84
- Chrome Member
- Posts: 122
- Joined: Wed Jan 26, 2005 10:23 pm
- Location: Penticton bc Canada
Hi Quakeholio, on your CB you should have the same mounting as the GL1100, aside of the front bracket you could see in front of the fork you have (if I remember correctly, it's been a while) two bolts on each side to remove, to get access to them you have to remove both glove compartment and you'll see them down at the bottom.
Wing84
Wing84
