GL1000 build - soon to be Fuel Injected

[robin1731]

This is the permatex sealer I was talking about earlier. https://www.amazon.com/Permatex-29132-M ... B000HBGHKE

.

[Rednaxs60]

Fuel pump install. The '85 and '86 FI GWs have external fuel pumps that fit into a bracket that is secured at the right foot peg. Pic with new aftermarket fuel pump installed in bracket:

Airtex fuel pump installed - 2.jpg

This pic shows the chrome fuel pump cover:

Right Side - Fuel PP Cover.jpg

The only mod to the tank would be a return spigotand internal spout. The '85/'86 return has an internal spigot about 1 inch or so long so that the return fuel is directed into the centre of the tank for cooling of the return gas. This setup may be an option for you.

[230Rocket]

Beautiful finish on the fork legs, gives it a real up-to-date look.

[GT-Ron]

Thanks Rocket. I used the textured black in a few places to offset some of the gloss and satin. I think it creates more interest than of everything was the exact same black.

After not being happy with heat given off by the external driver of the led h4 bulb in the oem housing, I got a complete 7” Led light (from a jeep i believe). Fits the oem bucket well. Must say i like it....