Dual webers on a GL

[BLACKGOLD]

Keep us up to date on this, Z . It will be interesting to see how it all fits and runs. 8)

[Annie's Boyfriend]

My adaptor for the two barrel weber to my single holley manifold is done painted and ready to mount .


http://www.ngwclub.com/gallery/zryder?page=1


( Z )

How long is this one Zryder, will it be sticking out between your tanks ??

Bart

[Try]

My adaptor for the two barrel weber to my single holley manifold is done painted and ready to mount .

It looks like a "killer intake" , nice work Z!!

[Zryder]

Here it is all together before the adaptor was finished , It will some , but to day I'm taking measurments and post here at to how far inbetween the frame and tanks .


Yes today I half to take off the seat and fix the water overflow where it enters the water bottle , that rubber fitting that holds the plastic elbow is some what deteriated and the plastic elbow pops out of the over flow bottle at times and thats where I'm loosing coolant , so when the engine cools the vacum draws nothing back to the motor , not good , so I am going to fix that . I'll keep that posted . Its so beautifyll out today so when thats done , I'm off for a scoot . Later All . ( Z )

[Zryder]

OK , I've taken some measurments . from the bottom of the orange manifold to the top of the carb there its 13 " , and thats not even with the air breather yet . So I'm looking at another custom job on my centre panel . But further and pics will be posted as I go along . ( Z )