Any Off the wall custom building being done to their GLs ???
Moderators: sunnbobb, Neil, Forum Moderators
- deathwing
- Brass Member
- Posts: 26
- Joined: Fri Jun 28, 2013 12:13 am
- Location: Iowa
Re: Any Off the wall custom building being done to their GLs
Yup felt it a few times on the big surprise bumps haha. I've been running the ballistic battery for 3 years now. I use em on all my bikes. It's been a champ. No issues at all. Always a good charge.
And I've just been running stock regulator and rectifier.
And I've just been running stock regulator and rectifier.
GL1000 - K75
http://oneoffs.bike/
http://oneoffs.bike/
- ericheath
- Honored Life Member
- Posts: 9597
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Any Off the wall custom building being done to their GLs
Cool, me too. It's being discussed here. I run an eight cell and it's plenty for my 1200 with 1000 heads. I have a Magna Reg/rect on it. You should snap more pics during your builds and start a topic for them. I love seeing them evolve.Its not too late if you did.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- deathwing
- Brass Member
- Posts: 26
- Joined: Fri Jun 28, 2013 12:13 am
- Location: Iowa
Re: Any Off the wall custom building being done to their GLs
I do have a build thread when I started it a while back. It's been through a number of stages to get to where it is now.
http://www.goldwingowners.com/#/forumsi ... 329?page=1
And here's a few more shots
http://www.goldwingowners.com/#/forumsi ... 329?page=1
And here's a few more shots
GL1000 - K75
http://oneoffs.bike/
http://oneoffs.bike/
- 82aspy
- True Blue Steel Biker
- Posts: 2279
- Joined: Sun Jul 01, 2012 8:12 pm
- Location: canuck
Re: Any Off the wall custom building being done to their GLs
details on the gas tank (install) pls!!??
"there is a Darwinian element"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"
- 82aspy
- True Blue Steel Biker
- Posts: 2279
- Joined: Sun Jul 01, 2012 8:12 pm
- Location: canuck
Re: Any Off the wall custom building being done to their GLs
quarefish wrote:Not that it is anything major but have not seen it on another wing. Up here in Canada it gets rather cold and having an old GL1000 one wants to keep the battery life as long as possible as is nasty trying to push start on the flats. Took off the old fairing as put on new 3 way blinkers and kept the lighted rear trunk. Due to the excessive current draw when starting up put a bank of 3 interrupter switches and rewired to control seperately the blinkers, trunk and headlight. After bike fires up throw them on when needed.
Whos a brilliant pup?
got some wiring info? i switched the headlight on my 82a to the handlebar near the throttle
Last edited by 82aspy on Fri Oct 30, 2015 7:13 am, edited 1 time in total.
"there is a Darwinian element"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"
- deathwing
- Brass Member
- Posts: 26
- Joined: Fri Jun 28, 2013 12:13 am
- Location: Iowa
Re: Any Off the wall custom building being done to their GLs
They're split tanks off an old Harley. Had to cut and reweld the bottoms in a different way to fit around the radiator cap, and electronics. All the electronics are laid out flat underneath the tanks. I think I have that all documented in my build thread above.82aspy wrote:details on the gas tank (install) pls!!??
GL1000 - K75
http://oneoffs.bike/
http://oneoffs.bike/
- 82aspy
- True Blue Steel Biker
- Posts: 2279
- Joined: Sun Jul 01, 2012 8:12 pm
- Location: canuck
Re: Any Off the wall custom building being done to their GLs
that link brings up a page titled - "Most Popular Discussions" with rhreads filling the page
what's the title of your thread? perhaps a direct link?
what's the title of your thread? perhaps a direct link?
"there is a Darwinian element"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"
- deathwing
- Brass Member
- Posts: 26
- Joined: Fri Jun 28, 2013 12:13 am
- Location: Iowa
Re: Any Off the wall custom building being done to their GLs
Whoops, my bad. This one seems to work: http://www.goldwingowners.com/forums/7- ... oject.html
GL1000 - K75
http://oneoffs.bike/
http://oneoffs.bike/
- 82aspy
- True Blue Steel Biker
- Posts: 2279
- Joined: Sun Jul 01, 2012 8:12 pm
- Location: canuck
Re: Any Off the wall custom building being done to their GLs
what the cool batwing looky like story here ..maan, thing beside it looks way cool too
nice details in your thread & build btw
nice details in your thread & build btw
"there is a Darwinian element"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"
- sunnbobb
- Facebook Admin
- Posts: 21299
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Any Off the wall custom building being done to their GLs
nicework death wing. Really good lines
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
-
- Lead Member
- Posts: 3
- Joined: Tue Nov 03, 2015 2:48 pm
- Location: sweden
Re: Any Off the wall custom building being done to their GLs
my 1986 aspencade 1200 on the build ..
im looking for a Honda Goldwing aspencade GL1200 1986 electric Color Schematic Diagram
i can find regular schematics (black/white) and Color Schematic to other years but not 1986 some one got it ?
im looking for a Honda Goldwing aspencade GL1200 1986 electric Color Schematic Diagram
i can find regular schematics (black/white) and Color Schematic to other years but not 1986 some one got it ?
You do not have the required permissions to view the files attached to this post.
Last edited by roughneck on Tue Nov 03, 2015 3:24 pm, edited 1 time in total.
-
- Tin Member
- Posts: 10
- Joined: Mon Aug 10, 2015 11:20 am
- My Album: https://www.shutterfly.com/lightbox/vie ... 16276141d2
- Location: Kearney Mo.
Re: Any Off the wall custom building being done to their GLs
roughneck, try this link for the Color Schematic. http://goldwingdocs.com/forum/viewtopic.php?t=20438 the bike looks cool.
Anyone who has never made a mistake has never tried anything new.
Albert Einstein
Albert Einstein
-
- Lead Member
- Posts: 3
- Joined: Tue Nov 03, 2015 2:48 pm
- Location: sweden
Re: Any Off the wall custom building being done to their GLs
is it the same electric Color Schematic for 1984 ? beccause i cant find the electric Color Schematic 1986
-
- Tin Member
- Posts: 10
- Joined: Mon Aug 10, 2015 11:20 am
- My Album: https://www.shutterfly.com/lightbox/vie ... 16276141d2
- Location: Kearney Mo.
Re: Any Off the wall custom building being done to their GLs
i bet a 1984 and 1986 are real close. you can also try this site. http://www.texaschapteru.org/gwsm
Anyone who has never made a mistake has never tried anything new.
Albert Einstein
Albert Einstein
- ericheath
- Honored Life Member
- Posts: 9597
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Any Off the wall custom building being done to their GLs
An 86 electrical schematics can be found at Classicgoldwings.com . You join for free, then access manuals under the "Gallery Tech References" banner at the top of the forums page. Here is the link, but I think you need to join to get this to work: http://forum.classicgoldwings.com/galle ... um_id=1963
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
-
- Similar Topics
- Replies
- Views
- Last post
-
- 39 Replies
- 1821 Views
-
Last post by Paul Narramore
-
- 16 Replies
- 1215 Views
-
Last post by 6adan
-
- 5 Replies
- 1601 Views
-
Last post by DustyDingus
-
- 17 Replies
- 2517 Views
-
Last post by dontwantapickle