I rode the poop out of my 78 going to and from Smoke Hole WV. Quite a ride, the roads are fantastic and the bike ran like a dream. Started cleaning the new (to me) engine for the 75.
.............Paul
I prefer to ride my wing naked,thank you
My wife asked me "How many bikes does one man need?" My answer "Uhhh.just one more"
75 Goldwing
78 Goldwing
77 CB750a
77 CB550f
80 CB650c
05 Boule C50
It was over 100 degrees as the sun set last night, at least 90 in my garage. I had run out of time over the weekend and was determined to put the radio back in, so I turned the fan on high and did it. Next weekend I'll finish the other details.
81 Interstate: gone but never forgotten.
13 F6B
NGW Cartel
Today I mounted some case savers (crash bars) from a 1200 on the 75. Right side went on real easy, left side not so easy. Left side may have been tweeked by the PO, had to really work on the lower mount. End result is good but it got dark before I could take a picture. Then it started to rain before I could take her for a spin.
Al
2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1986 Goldwing Aspy 2nd daily rider
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
Rode the 1500 to work today, geez its huge !!!
Got the 76 vetter out and rode to work on a buddys 1500..
Dadburn been sittin 10 days and the brakes are draggin'.
Just 4K on on complete brake rebuild and they been actin up
since the rain ride home from mid ohio.. right front and the rear..
Suppose a dismantle,clean reassemble is in order.
BUMS ME !!!!
Tom
1976 LTD #276
1976 BLACK VETTER (soon to be naked)
1978 Naked(soon to be dressed)
1983 750 sabre(1476 miles) next project
1989 1500
1998 cr250
1974 bultaco 250
1973 suzuki tm125
Ordered the float tower repair kit from Randakk along with new float pins. Ordered one replacement slide needle, although I really want two. Finding these things in stock is a real challenge as I trying to get my carbs back together this weekend.
'76 CB750F, parts for about 2 CB550's, '72 MGB-GT
Past bikes: '75 CB550F, 77 GL1000, '77 CB550K, '89 Yamaha FJ1200, '02 Royal Enfield Bullet 500ES, '68 Suzuki K11, '69 Yamaha YR2, '70 Honda SL175, '69 BMW R69S.
Broke the dang clutch cable leaving the store to go home, just turned left switched to left lane to go around a truck grab for 2nd snap!!! dang 20 miles to go, stuck in first. time a couple round abouts just right and easy back roads most of the way. I still cant beleive that everyone that had to pass me must of thought that i was going slow just so i could ruin their day, yah i know the speed limit is 55 no honking at me wont fix my clutch cable.
Phil US Army vet
Not all who wander are lost
1971 cb 350 (gave away)
2007 xl 1200 nightster (sold)
1979 gl 1000 daily driver work in progress
1976 gl 1000 under the knife, or wrench
Leaving my house to replace my friends harley tire. I started the bike snapped the throttle to take off and snap goes the pull cable.
and my spare is off a 78 and different.
1CrazyMoFo wrote:You know ya can zip tie an extra set of throttle cables and clutch into a loop, it'll sit right on top of your air breather.
Peace,
Frank
Go buy a Honda Minitrail 50.
time a couple round abouts just right and easy back roads most of the way. I still cant beleive that everyone that had to pass me must of thought that i was going slow just so i could ruin their day, yah i know the speed limit is 55 no honking at me wont fix my clutch cable. 
