OK she isn't 100% yet but I did test ride her yesterday. One of my floats is not adjusted correctly and it floods out #4 after it warms up. So the FatWing still needs fine tuning and a seat made BUT she is damb close. Oh and BTW she started on the first try. Thanks for all your guys help. Check out the link below.
http://www.ngwclub.com/gallery/fat_wing
FW
Test Ride Day
Moderators: sunnbobb, Neil, Forum Moderators
- Fat_Wing
- Cast Iron Member
- Posts: 65
- Joined: Wed Mar 09, 2005 7:16 am
- Location: Michigan, USA
- Contact:
- Try
- NGW Founder
- Posts: 1914
- Joined: Fri Oct 15, 2004 5:33 pm
- My Album: http://www.ngwclub.com/gallery3/index.p ... wing-album
- Location: Norway
- Contact:
Re: Test Ride Day
Fat_Wing wrote:OK she isn't 100% yet but I did test ride her yesterday. One of my floats is not adjusted correctly and it floods out #4 after it warms up. So the FatWing still needs fine tuning and a seat made BUT she is damb close. Oh and BTW she started on the first try. Thanks for all your guys help. Check out the link below.

Looks really great, a big raisin pie to you sir!!
--
Try
"84 - GL1200 Standard

-
Try
"84 - GL1200 Standard

-
- Zryder
- True Blue Steel Biker
- Posts: 2954
- Joined: Tue Dec 14, 2004 2:12 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/zryder/
-
- Zinc Member
- Posts: 50
- Joined: Sun Feb 27, 2005 5:52 pm
- Location: Niagara Falls
- BLACKGOLD
- Silver Member
- Posts: 798
- Joined: Tue Mar 01, 2005 7:39 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/BLACKGOLD/
- Location: Aurora, CO
- Try
- NGW Founder
- Posts: 1914
- Joined: Fri Oct 15, 2004 5:33 pm
- My Album: http://www.ngwclub.com/gallery3/index.p ... wing-album
- Location: Norway
- Contact:
I'll send you a password to Wingmans loungeWannabe wrote: I should have pictures today of my ride, it's almost ready to ride (just have to mount a seat and make some adjustments to my rear fender). Now if I can figure out how to post them 8)
--
Try
"84 - GL1200 Standard

-
Try
"84 - GL1200 Standard

-
- Fat_Wing
- Cast Iron Member
- Posts: 65
- Joined: Wed Mar 09, 2005 7:16 am
- Location: Michigan, USA
- Contact:
The trees are off a 2000 shadow and I had to shorten the stem by 1.5 inch so it would fit the GL frame, then put the stock GL bearings on it. It is about 1 inch wider than the stock GL so you need to have a shadow axle.Wannabe wrote:Hey FW;
What are your triple trees/forks off? Any modifications on the gooseneck?
I should have pictures today of my ride, it's almost ready to ride (just have to mount a seat and make some adjustments to my rear fender). Now if I can figure out how to post them 8)
Thanks for the comments guys.
FW
- BIG T
- Gold Member
- Posts: 1368
- Joined: Sat Dec 04, 2004 12:42 am
- My Album: http://www.ngwclub.com/gallery3/index.p ... ustom_wing
- Location: U.S.A.
- Fat_Wing
- Cast Iron Member
- Posts: 65
- Joined: Wed Mar 09, 2005 7:16 am
- Location: Michigan, USA
- Contact: