Hello to all members
Moderators: rcmatt007, Neil, redwood, Forum Moderators
-
- Rusty Probie
- Posts: 2
- Joined: Sun Jun 21, 2015 7:28 am
- Location: Ottawa, Ontario, Canada
Hello to all members
Hello from Ottawa, Canada.
Well it is about time I introduce myself to the forum members since I have been a member of this site for the past four years! It all started when I felt sorry for an abused ‘77 that I found. Many dollars and parts bikes later, I finally was able to ride it this summer and they are truly a great old bike!
Well it is about time I introduce myself to the forum members since I have been a member of this site for the past four years! It all started when I felt sorry for an abused ‘77 that I found. Many dollars and parts bikes later, I finally was able to ride it this summer and they are truly a great old bike!
You do not have the required permissions to view the files attached to this post.
- CYBORG
- Moderator
- Posts: 24757
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: Hello to all members
Welcome. The bike looks good
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- Sugs
- Gold Member
- Posts: 1071
- Joined: Sun Aug 09, 2015 6:12 pm
- Location: Springfield, MO
- Rat
- Photo Gallery Admin
- Posts: 15710
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie, KyPM, Roady
- Location: Toronto .... Canada
Re: Hello to all members
Welcome to the 'Wingdom.
Always nice to see another Canuck.
Gord
Always nice to see another Canuck.
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
- desertrefugee
- SUPER BIKER!!!!
- Posts: 3947
- Joined: Fri Nov 11, 2011 9:33 pm
- Location: Chandler, AZ, USA
Re: Hello to all members
Welcome from Arizona. We had snow in the mountains last week, but I doubt there's been that much here in the low desert for the last few millennia.
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
- 5speed
- Honored Life Member
- Posts: 5324
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: Hello to all members
welcome from the east coast.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- 77Gowing
- True Blue Steel Biker
- Posts: 2724
- Joined: Wed Jul 22, 2015 4:31 pm
- Location: San Angelo, Texas
Re: Hello to all members
Welcome from Texas!
"Less is More" Anonymous
77Gowing
1977 GL1000 "O'le Blue." (sold )
2014 Yamaha 950 V Star (sold)
2017 Indian Scout Std w/ABS (sold)
2009 Honda VTX1300R "Me Brudder's" (sold)
1984 Honda Interstate "84' 2outa4." Gone
1982 Honda GL1100 "After thought." Gone
77Gowing
1977 GL1000 "O'le Blue." (sold )
2014 Yamaha 950 V Star (sold)
2017 Indian Scout Std w/ABS (sold)
2009 Honda VTX1300R "Me Brudder's" (sold)
1984 Honda Interstate "84' 2outa4." Gone
1982 Honda GL1100 "After thought." Gone
- chewy999
- SUPER BIKER!!!!
- Posts: 3214
- Joined: Tue Oct 16, 2012 11:21 am
- Location: Haddenham, Cambs, UK
Re: Hello to all members
Welcome from the UK, bike looks great!
Previous Rides,
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
- Track T 2411
- Honored Life Member
- Posts: 8693
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Hello to all members
Welcome from Wisconsin.
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- Rednaxs60
- Gold Member
- Posts: 1028
- Joined: Mon Nov 30, 2015 11:14 pm
- Location: Victoria, BC, Canada
Re: Hello to all members
Nice ride. Welcome from the west coast rock. You'll have many enjoyable rides and Kms with this one. Cheers
"When writing the Story of your life, don't let anyone else hold the pen."
Ernest
1985 GL1200 Limited Edition
2014 Can-Am Spyder RT LE
2021 Royal Enfield Himalayan
1995 GL1500 SE CDN Edition (sold)
2012 Suzuki DL1000 VStrom (sold)
Ontario 1985 GL1200 Limited Edition (sold)
2008 GL1800 (sold)
Ernest
1985 GL1200 Limited Edition
2014 Can-Am Spyder RT LE
2021 Royal Enfield Himalayan
1995 GL1500 SE CDN Edition (sold)
2012 Suzuki DL1000 VStrom (sold)
Ontario 1985 GL1200 Limited Edition (sold)
2008 GL1800 (sold)
- rcmatt007
- Treasurer
- Posts: 31468
- Joined: Fri Oct 21, 2005 12:48 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
- Location: New River Valley, Virginia
Re: Hello to all members
welcome to NGW
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
-
- Rusty Probie
- Posts: 2
- Joined: Sun Jun 21, 2015 7:28 am
- Location: Ottawa, Ontario, Canada
Re: Hello to all members
Thanks you all! Glad to be apart of this great club. I have owned many Hondas in the past but this one has been a handful. It’s hard to find a good engine without cylinder corrosion and good compression. Most parts bikes around here have sat for years with little to no shelter. I currently have pulled the third engine and in the process of building up an 1100 to install. Going to use ‘76 carbs and cams with a Dyna ignition. Engine was running and had 160psi on all four before removal. I hope this time is all comes together!!
-
- Honored Life Member
- Posts: 4650
- Joined: Wed Jun 28, 2006 2:52 pm
- Location: up by the Canadian border in WA state
Re: Hello to all members
not going to say welcome as you've been 'round a while but "HELLO again"...
nice job on the bike.
sounds like a very interesting setup you have going on. keep us informed.
nice job on the bike.
sounds like a very interesting setup you have going on. keep us informed.
sorta bulldogged custom 1978 GL1000 - "geekster"
full Vetter dress 1979 GL1000 - "Barge" (currently down)
1986 1200 Aspencade - "Heart of Gold" - daily rider
1990 1500 Aspencade - It's ALIVE! but very, very naked. not in a good way.
1978 for $100 - project in worx
1978 from a previous member here - taking up space
my original '79 bought in '91 - replacing engine (eventually, maybe someday)
added an '05 1800 to the stable, all the rest gotta go
H2G2=42
A competent and self-confident person is incapable of jealousy in anything. Jealousy is invariably a symptom of neurotic insecurity. ~ Robert A. Heinlein
The good thing about science is that it's true whether or not you believe in it. ~ Neil deGrasse Tyson
full Vetter dress 1979 GL1000 - "Barge" (currently down)
1986 1200 Aspencade - "Heart of Gold" - daily rider
1990 1500 Aspencade - It's ALIVE! but very, very naked. not in a good way.
1978 for $100 - project in worx
1978 from a previous member here - taking up space
my original '79 bought in '91 - replacing engine (eventually, maybe someday)
added an '05 1800 to the stable, all the rest gotta go
H2G2=42
A competent and self-confident person is incapable of jealousy in anything. Jealousy is invariably a symptom of neurotic insecurity. ~ Robert A. Heinlein
The good thing about science is that it's true whether or not you believe in it. ~ Neil deGrasse Tyson
- Earl43P
- Silver Member
- Posts: 675
- Joined: Fri Mar 02, 2012 8:10 pm
- Location: Farmington, PA
Re: Hello to all members
Thanks for the introduction (from a VH60N Rep). Persevere my rotorhead brother.
I had 3 different engines in my 82 GL1100, put well over 60,000 miles on 2 of them.
The original only gave me about 120 miles before an intake valve snapped, grenading the cylinder wall.
You're well into "wrenching season" up there, I'm sure. Good luck with it.
Looks like you've got a very nice machine, get a look at that exhaust!
We'd love to see any "before" pictures....."during" pictures.....
I had 3 different engines in my 82 GL1100, put well over 60,000 miles on 2 of them.
The original only gave me about 120 miles before an intake valve snapped, grenading the cylinder wall.
You're well into "wrenching season" up there, I'm sure. Good luck with it.
Looks like you've got a very nice machine, get a look at that exhaust!
We'd love to see any "before" pictures....."during" pictures.....
2008 GL1800 "yawn"
KTM390A “Hootinanny”
04 ST1300 DDDD (Double darksided daily driver) Sold 4/2022
93 GL1500I Double darksided and SOLD 3/29/20.
99 Valkyrie IS, Fast Black Double Darksided
"Fishtailed, flipped and flung me, but wearing it well". Sold!
82 GL1100 retired DD, needs work.... Sold 3/3/17
KTM390A “Hootinanny”
04 ST1300 DDDD (Double darksided daily driver) Sold 4/2022
93 GL1500I Double darksided and SOLD 3/29/20.
99 Valkyrie IS, Fast Black Double Darksided
"Fishtailed, flipped and flung me, but wearing it well". Sold!
82 GL1100 retired DD, needs work.... Sold 3/3/17
-
- Similar Topics
- Replies
- Views
- Last post