Page 1 of 1
Question about 7v regulator
Posted: Mon Feb 22, 2021 11:58 pm
by 6adan
The 1000 I am working on I thought was overheating but after checking more I do not thank it really is overheating it is just the gauge shows it is. Will the 7v regulator make the gauge do this? Thanks Dannie
Re: Question about 7v regulator
Posted: Tue Feb 23, 2021 12:42 am
by gltriker
yes.
Re: Question about 7v regulator
Posted: Tue Feb 23, 2021 8:02 am
by Whiskerfish
It also operates the fuel gauge so if that is ready faulty then odds are very high you have an issue with the 7V reg.
Re: Question about 7v regulator
Posted: Tue Feb 23, 2021 1:26 pm
by Sidecar Bob
The best way to tell is to simply measure the output of the 7V reg and if it is anything other than 7V get in touch with Murray
https://murrayscarbs.com/product/7-volt-regulator/ (if you let him know which model you will be using it in he will send it with the correct terminals)
Re: Question about 7v regulator
Posted: Tue Feb 23, 2021 3:28 pm
by 6adan
Thanks guys, If I don't have one around in my pile of stuff I will check with Murry.
Re: Question about 7v regulator
Posted: Tue Feb 23, 2021 4:33 pm
by Explorer
The folks at golwingdocs.com sell a really neat, fit it and forget it solid state one for around $30 for any year or model.
Re: Question about 7v regulator
Posted: Tue Feb 23, 2021 5:28 pm
by Sidecar Bob
Murray's is also solid state for only $20 US....