Bike of the Year voting in the Clubhouse
https://ngwclub.com/forum/viewtopic.php?t=78995#p828493
https://ngwclub.com/forum/viewtopic.php?t=78995#p828493
Hello from Canada
Moderators: rcmatt007, Neil, redwood, Forum Moderators
- Bytown Bandit
- Zinc Member
- Posts: 37
- Joined: Sat Jan 30, 2021 9:17 am
Hello from Canada
Hello, and thank you for accepting me into the group. I'm looking forward to learning more about the 1977 GL1000 that I'm working on.
This bike belonged to a close friend who passed away a couple of years ago. He built the bike in 2001, 2002 and only put 5,000 miles on it. In 2003 it was taken off the road and stored in bins in his basement. Around 2015 he put some of it back together and put it in his living room.
I acquired the bike from his family, and I want to put it back together as a tribute to the former owner, and do a few upgrades along the way.
It has a single carb (Holley), Dyna S electronic ignition, Jardine pipes, Progressive Rear Shocks, and a Corbin Seat. A lot of the stock parts are gone so I want to continue with a resto-mod cafe style bike.
Back in 2001 the bike was totally stripped down and the frame painted and detailed. The bike is in amazing shape with the front forks rebuilt, aluminum parts polished,(I will be re-doing) and the motor freshened with new pistons, rings, and clutch in 2002, and more that I don't know about.
I'm looking at upgrading the wiring. (m-gadget?) Brakes (front) without changing the front forks. If I need to change the front end I will but I want to keep the spoked front wheel. As well I want to install LED lights and turn signals.
I will be looking for some advice on my plans, and where would I go to get GL1000 parts.
Pictures 1 taken in 06-15-2002
Picture 2 Taken in 08-23-2015
Picture 3 & 4 taken 04-11-2021
I'm sure you have some good advice...
This bike belonged to a close friend who passed away a couple of years ago. He built the bike in 2001, 2002 and only put 5,000 miles on it. In 2003 it was taken off the road and stored in bins in his basement. Around 2015 he put some of it back together and put it in his living room.
I acquired the bike from his family, and I want to put it back together as a tribute to the former owner, and do a few upgrades along the way.
It has a single carb (Holley), Dyna S electronic ignition, Jardine pipes, Progressive Rear Shocks, and a Corbin Seat. A lot of the stock parts are gone so I want to continue with a resto-mod cafe style bike.
Back in 2001 the bike was totally stripped down and the frame painted and detailed. The bike is in amazing shape with the front forks rebuilt, aluminum parts polished,(I will be re-doing) and the motor freshened with new pistons, rings, and clutch in 2002, and more that I don't know about.
I'm looking at upgrading the wiring. (m-gadget?) Brakes (front) without changing the front forks. If I need to change the front end I will but I want to keep the spoked front wheel. As well I want to install LED lights and turn signals.
I will be looking for some advice on my plans, and where would I go to get GL1000 parts.
Pictures 1 taken in 06-15-2002
Picture 2 Taken in 08-23-2015
Picture 3 & 4 taken 04-11-2021
I'm sure you have some good advice...
- Attachments
-
- A 05-07-2001 06-07-2002 Barry's Journal (15).jpg (161.65 KiB) Viewed 1781 times
-
- D 08-23-2015 (2).jpg (156.46 KiB) Viewed 1781 times
-
- 03-27-2021 Back to Stradwick 1) (13).jpg (151.1 KiB) Viewed 1781 times
-
- 04-11-2021 Cleaning & Rewiring (11).jpg (188.6 KiB) Viewed 1781 times
Last edited by Bytown Bandit on Mon Sep 04, 2023 6:15 am, edited 1 time in total.
Bytown Bandit
1977 GL1000 | 2020 BMW S1000XR
Ottawa, ON, Canada
1977 GL1000 | 2020 BMW S1000XR
Ottawa, ON, Canada
- Track T 2411
- Honored Life Member
- Posts: 8692
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Hello from Canada
Welcome from Wisconsin, USA. Looks beautiful! As far as upgrading the brakes, a relatively easy upgrade is going with later model two piston calipers and a matching master cylinder. The '82 Standard and Interstate (not Aspencade) calipers (with brackets) are basically a bolt- on. There are a few threads about the swap, and at least one list of other Honda models and years that used the same setup.
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- Rat
- Photo Gallery Admin
- Posts: 15706
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie, KyPM, Roady
- Location: Toronto .... Canada
Re: Hello from Canada
Welcome to the 'Wingdom.
Always good to see another Canuck.
Lots of good info in ShopTalk too.
Gord
Always good to see another Canuck.
Lots of good info in ShopTalk too.
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
- 5speed
- Honored Life Member
- Posts: 5324
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: Hello from Canada
welcome from the east coast. beautiful looking wing.
I too have one that belonged to a friend that passed away.
it's on my list to restomod.
I too have one that belonged to a friend that passed away.
it's on my list to restomod.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
-
- Chrome Member
- Posts: 112
- Joined: Sat Mar 21, 2020 5:30 am
- Location: Arizona
Re: Hello from Canada
Welcome from the desert of Arizona.
Nice looking wing. I can't imagine what it must be like to have a bike that belonged to someone you were so close to. Might happen to me one day.
Good luck with the project.
Nice looking wing. I can't imagine what it must be like to have a bike that belonged to someone you were so close to. Might happen to me one day.
Good luck with the project.
1976 Goldwing GL-1000
1998 Royal Star 1300
2001 Honda Shadow Spirit 750
Past Bikes
1975 Kawasaki KZ400
1977 Goldwing GL-1000
1998 Royal Star 1300
2001 Honda Shadow Spirit 750
Past Bikes
1975 Kawasaki KZ400
1977 Goldwing GL-1000
- Sandy
- Gold Member
- Posts: 1013
- Joined: Tue Jun 17, 2008 9:15 am
- Location: Barrie, ON, Canada
- Contact:
Re: Hello from Canada
Hello from Barrie Ontario.
-
- Titanium Member
- Posts: 407
- Joined: Tue Dec 08, 2020 2:23 pm
- Location: Slaton Tx (just o/s Lubbock)
Re: Hello from Canada
Welcome from Texas. Nice looking bike. It deserves to be back on the road.
1975 GL1000 Restored (sold)
1983 GL1100 Custom (sold)
1976 GL1000 Project (finished and sold)
Another1976 GL1000 Project (finished and sold)
1983 GL1100 Custom (sold)
1976 GL1000 Project (finished and sold)
Another1976 GL1000 Project (finished and sold)
- Rednaxs60
- Gold Member
- Posts: 1027
- Joined: Mon Nov 30, 2015 11:14 pm
- Location: Victoria, BC, Canada
Re: Hello from Canada
Welcome from the west coast rock of Canada. Enjoy your new ride. If it runs and is roadworthy, ride for the summer months, wiring projects are good fall/winter work items.
"When writing the Story of your life, don't let anyone else hold the pen."
Ernest
1985 GL1200 Limited Edition
2014 Can-Am Spyder RT LE
2021 Royal Enfield Himalayan
1995 GL1500 SE CDN Edition (sold)
2012 Suzuki DL1000 VStrom (sold)
Ontario 1985 GL1200 Limited Edition (sold)
2008 GL1800 (sold)
Ernest
1985 GL1200 Limited Edition
2014 Can-Am Spyder RT LE
2021 Royal Enfield Himalayan
1995 GL1500 SE CDN Edition (sold)
2012 Suzuki DL1000 VStrom (sold)
Ontario 1985 GL1200 Limited Edition (sold)
2008 GL1800 (sold)
-
- True Blue Steel Biker
- Posts: 2324
- Joined: Wed Apr 11, 2012 10:50 am
Re: Hello from Canada
Welcome, you sure got your hands on a good lookin wing.
Dave
1975 GL 1000
1980 XS650
1981 ct110
1972 F7 KAW 175
2000 moby blaze 40cc
Chihuahua (Ellie)
Chihuahua #2(Blaze)
1975 GL 1000
1980 XS650
1981 ct110
1972 F7 KAW 175
2000 moby blaze 40cc
Chihuahua (Ellie)
Chihuahua #2(Blaze)
- Sidecar Bob
- Honored Life Member
- Posts: 7884
- Joined: Sun Jun 11, 2006 10:14 pm
- Location: Kawartha Lakes, Ontario
Re: Hello from Canada
Are you a Misfit?
https://www.facebook.com/groups/OttawaM ... ycleGroup/
https://www.facebook.com/groups/OttawaM ... ycleGroup/
Mr. Honda ('83 GL1100/Dnepr) summer How a motorcycle evolves thread
The Famous Eccles ('84 CX650EI/VeloUral) winter Never Ending Build (CX500forum)
Click: Colour schematics for all GL1000 & GL1100 and GL1200 standard models plus instructions on how to download the full size version
"A guy with two sidecars can't be all bad." - Cookie
Another guy with two sidecars..... Hmmmm... must be something to that....
The Famous Eccles ('84 CX650EI/VeloUral) winter Never Ending Build (CX500forum)
Click: Colour schematics for all GL1000 & GL1100 and GL1200 standard models plus instructions on how to download the full size version
"A guy with two sidecars can't be all bad." - Cookie
Another guy with two sidecars..... Hmmmm... must be something to that....
- Fred Camper
- Vice President
- Posts: 7105
- Joined: Wed Aug 12, 2009 9:38 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
- Location: Metro Detroit
- Contact:
Re: Hello from Canada
Congratulations on the September 2023 BOTM. Great build story and excellent bike.
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
- Bytown Bandit
- Zinc Member
- Posts: 37
- Joined: Sat Jan 30, 2021 9:17 am
Re: Hello from Canada
Thank you for choosing my 77 GL1000 for September Bike of the Month, and for all the help I’ve received from members of this forum when I had questions.
The bike was built as a tribute to the former owner who tragically died of suicide in 2018. Since 2019 I have been organizing an annual ride to bring awareness to Mental Health, and raise money for the Royal Ottawa Hospital and Mental Health Foundation. I use the bike when I can, as it’s a symbol for the Mental Health challenges people face. (this year’s ride is on September 17, 2023)
Thank you again, I’m humbled, and it means so much to me.
John Armstrong
The bike was built as a tribute to the former owner who tragically died of suicide in 2018. Since 2019 I have been organizing an annual ride to bring awareness to Mental Health, and raise money for the Royal Ottawa Hospital and Mental Health Foundation. I use the bike when I can, as it’s a symbol for the Mental Health challenges people face. (this year’s ride is on September 17, 2023)
Thank you again, I’m humbled, and it means so much to me.
John Armstrong
- Attachments
-
- IMG_3225.jpeg (496.91 KiB) Viewed 1398 times
-
- IMG_3226.jpeg (300.85 KiB) Viewed 1398 times
-
- IMG_3309.jpeg (539.57 KiB) Viewed 1398 times
Last edited by Bytown Bandit on Mon Sep 04, 2023 3:45 am, edited 2 times in total.
Bytown Bandit
1977 GL1000 | 2020 BMW S1000XR
Ottawa, ON, Canada
1977 GL1000 | 2020 BMW S1000XR
Ottawa, ON, Canada
- pidjones
- SUPER BIKER!!!!
- Posts: 3285
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
Re: Hello from Canada
Over-all a well deserved recognition and a great honor to your friend's memories. Even better, it will be on the annual calendar - she's a calander girl!
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
- LastMohawk
- Billet Alum. Member
- Posts: 237
- Joined: Fri Jun 07, 2013 7:57 am
- Location: Eifel, Germany
- Contact:
Re: Hello from Canada
Hello,
first congratulations on the great bike and the BOTM.
A question, what you have for a front fender installed. I like it very much.
Greetings Harald
first congratulations on the great bike and the BOTM.
A question, what you have for a front fender installed. I like it very much.
Greetings Harald
- Jonesz
- Silver Member
- Posts: 912
- Joined: Mon Apr 24, 2017 9:03 pm
- Location: Manitoba, Canada
Re: Hello from Canada
Very deserving bike. Congrats, looks gr8
Jonesz
1983 GL1100 Aspencade named "Freki" currently undergoing change to a standard. Sold
1999 Valkyrie CT 1500 goes by the moniker "Valerie"
1978 Gl1000 "Loki" new project going to be a Cafe Convertible
1979 Suzuki GS850. Sold
1983 GL1100 Aspencade named "Freki" currently undergoing change to a standard. Sold
1999 Valkyrie CT 1500 goes by the moniker "Valerie"
1978 Gl1000 "Loki" new project going to be a Cafe Convertible
1979 Suzuki GS850. Sold
-
- Similar Topics
- Replies
- Views
- Last post
-
- 12 Replies
- 1042 Views
-
Last post by Steevensi
-
- 12 Replies
- 851 Views
-
Last post by Sandy
-
- 8 Replies
- 844 Views
-
Last post by sparkyrasmus
-
- 11 Replies
- 1127 Views
-
Last post by chewy999
-
- 25 Replies
- 776 Views
-
Last post by holleman14