NGWClub®, Inc.

Gent’s
Does anyone know the size of the steering head nut, as in thread diameter & pitch?

I have just changed the steering head bearings with all original OEM Honda races, ball bearings,
I forgot to check the sizes, when off & don’t want to struggle with that nut again!

I am looking to see if any of the chrome acorn type nuts of possibly off a CB 750 / 900 will fit?
as the bearings & races fit various CB models.


See attached picture.

Couple part numbers but no description available it seems

53220-286-000
53220-371-980

CB750 should fit if you have a '75, '76, or'77 GL.

Mine is a 75 GL1000.

I will try and locate a chrome nut that will fit

I found this one.
I am messaging seller to check diameter size.

This is from the 77 parts catalog
21 90304-371-000 NUT. STEERING STEM
From the 78 catalog it looks to be the same part
009 NUT, STEERING STEM X 001 90304-371-000

Yeah, that’s the original one, I don’t want to put that one on, that’s why I’m looking for a regular chrome cap nut.

I have one for you -



- pm your address and I'll ship it out, no charge. It's in decent shape too, found it in my bucket o' bits n bolts

jimbonaut wrote: ↑Tue Jan 28, 2025 12:52 pm I have one for you -



- pm your address and I'll ship it out, no charge. It's in decent shape too, found it in my bucket o' bits n bolts

Thanks jimbonaut,
I’m up in Canada. I can order one, just tell me if it’s M24 x what the thread pitch is?
I appreciate the offer.

I measured the internal diameter of the nut, 23mm, thread pitch is 1mm.

I'm in Canada too, more than happy to send this to you if it's what you're after

jimbonaut wrote: ↑Wed Jan 29, 2025 12:59 pm I measured the internal diameter of the nut, 23mm, thread pitch is 1mm.

I'm in Canada too, more than happy to send this to you if it's what you're after

I sent you a PM