electrical question

[Annie's Boyfriend]

I am really curious if this mess can be fixed.
on this picture you can see how the fairing got lighted.
The white connectors look like the originals.



It looks a bit too much though, any thoughts on how to tidy up that mess ??

Bart

[Zryder]

What I would do is follow the wiring from the fairing down to where they connect and cut them there . But be carefull not to cut the wiring to there electrical , just that wires off of the fairing harness . I have a std . but there was alot of wires in the headlight pod I put all those inbetween the dumnmy tank . the only wires I have there now is the headlight wires and the signals .

[quakeholio]

It just astounds me that the makers can get so many wires into the small space of the head light. Best of luck on the project and I hope it goes well.

[Brant]

I cleaned up mine a lot by doing what Z said, but I still have a ways to go to get it super clean. It is amazing the way its all done once you get in there and start poking around.